RESEARCH PUBLICATIONS IN NATIONAL CONFERENCES

DR. NAMRATA GANGIL

[1] Namrata Gangil, Vikas Maanjreker, Durgesh Joshi “Optimization of LASER Welding using ANOVA & Multiple Regression”, Design and Analysis on Mechanical Systems using Optimization Techniques, organized by Institution of Engineers (India) Indore, in association with Institute of Engineering and Technology,Devi AhilyaVishwavidyalaya (IET-DAVV), Indore at 14-15 October, 2011.

DR. UMESH KUMAR VISHWAKARMA

[1] Bhardwaj Anuj and Vishwakarma Umesh Kumar, National Conference on Mechanical and Automation Engineering (MAAE-2020), Ajay Kumar Garg Engineering College, Ghaziabad, pp. 65-69, 7-8 February, 2020.

[2] Vishwakarma Umesh Kumar, Dvivedi Akshay and Kumar Pradeep, National Conference on Unconventional Manufacturing Technology (UMT-2017), Ajay Kumar Garg Engineering College, Ghaziabad, pp. 117-121, 22-23 September, 2017.

[3] Janghel, Omprakash and Vishwakarma, Umesh Kumar, National Conference on Research Challenges in Science, Technology & Management for National Development (BITCON 2017), Bhilai Institute of Technology, Durg, pp. 42-53, 28 March, 2017.

[4] Dewangan, Satya Kumar and Vishwakarma, Umesh Kumar, National Conference on Research Challenges in Science, Technology & Management for National Development (BITCON 2017), Bhilai Institute of Technology, Durg, pp. 305-310, 28 March, 2017.

[5] Vishwakarma, U. K., Dvivedi, A. and Kumar, P., 4th International & 25th AIMTDR Conference, Jadavpur University, pp. 67, 14-16 December, 2012.

[6] Vishwakarma, U. K., Dvivedi, A. and Kumar, P., 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3 2012), Hotel Fort Canning, Singapore, pp. 151-154, 19-20 November, 2012.

[7] Vishwakarma, U. K., Dvivedi, A. and Kumar, P., 2nd Annual International Conference on Materials Science, Metal & Manufacturing (M3 2012), Hotel Fort Canning, Singapore, pp. 155-161, 19-20 November, 2012.

[8] Vishwakarma, U. K., Dvivedi, A. and Kumar, P., International Conference on Processing and Fabrication of Advanced Materials (PFAM 21), IIT Guwahati, pp. 1051-1057, 10-13 December, 2012.

DR. SUMAN GOTHWAL

[1] Gothwal Suman, and Tripathi B. N., National Conference on Investigation of surface integrity of cylinder liner of I.C. Engine by Honing Process using RSM Technique, Ajay Kumar Garg Engineering College, Ghaziabad. 7-8 February, 2020.

[2] Gothwal Suman and Jain Vineet, National Conference on An Overview of flexibility of Flexible Manufacturing System (FMS), Ajay Kumar Garg Engineering College, Ghaziabad. 7-8 September, 2018.

DR. ALOK VARDHAN

[1] A. Vardhan, Methodology for designing a hydraulic system for the rotary head of blasthole drill machine,National conference on Mechanical and Automation Engineering (MAAE-2020) organized by Departmental of Mechanical Engineering, Ajay Kumar Garg Engineering College, Ghaziabad, 7-8 February, 2020.

[2] A. Vardhan, A. K. Pandey, N. Kumar, and A. Kumar,Capacity estimation of a belt conveyor system using conventional approach,All India seminar on Advances in Mine Transport System organized by The Institution of Engineers (India) Dhanbad Local Centre,20-21 January, 2016.

[3] A. Vardhan, A. Satyam, N. Kumar, and A. Kumar,Hydrostatic transmission system: Overview and literature review, 47th Engineer’s Day organized by The Institution of Engineers (India) Dhanbad Local Centre in association with Indian School of Mines, Dhanbad,15 September, 2015.

[4] A. Vardhan,A. Satyam, A. P. Singh, R. K. and A. Kumar,The current scenario of non-conventional energy resources in India,National Conference on Advances in Thermal Engineering (AITE 2014) organized by Department of Mechanical Engineering, Indian School of Mines, Dhanbad,19-20 December, 2014.

[5] A. P. Singh, A. Satyam, A. Vardhan, N. Kumar Sinha, andA. Kumar,Effective utilization of thorium in Indian nuclear industry reducing the usage of limited uranium resources,National Conference on Advances in Thermal Engineering (AITE 2014) organized by Department of Mechanical Engineering, Indian School of Mines, Dhanbad,19-20 December, 2014.

[6] A. Kumar, V. Srivastava, L. Kumar, A. Vardhan, andR. Kumar,A GIS-Based application and analysis features of land survey of urban area of raster data map,In the International Conference on Advances in Engineering & Technology (ICAET-14) held at Hotel the Sonnet, Jamshedpur, India,11-12 October, 2014.

[7] R. Kumar,A. Vardhan, A. P. Singh, and G.Jha,Indian water scenario and waste water treatment in India, National Conference on Water and its Sustainability in Mining and Other Environment: Vision 20150 (WSME 2014) organized by Department of Civil Engineering, Indian School of mines Dhanbad,28-29 March, 2014.

DR. TARUN BHARDWAJ

[1] Bhardwaj Tarun and Shukla Mukul, Effect of Scan Direction on Tensile properties and Fractography of Laser Additive Manufactured Maraging Steel, 9th International Conference of Materials Processing and Characterization, GRIET, Hyderabad, pp. 3842-3848, 8-10 March, 2019, DOI: https://doi.org/10.1016/j.matpr.2019.07.323

[2] Bhardwaj Tarun and Shukla Mukul, Effect of Scan Direction on Tensile properties and Fractography of Laser Additive Manufactured Maraging Steel, 8th International Conference of Materials Processing and Characterization, GRIET, Hyderabad, pp. 20485-20491, 16-18 March, 2018, DOI: https://doi.org/10.1016/j.matpr.2018.06.425

[3] Bhardwaj Tarun, Singh Surya Pratap and Shukla Mukul, Finite element modeling and analysis of implant scaffolds, International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS), MNNIT, Allahabad, pp. 358-362, 3-5 February, 2017, DOI: https://10.1109/AMIAMS.2017.8069239

[4] Singh Surya Pratap, Bhardwaj Tarun and Shukla Mukul, Lattice modeling and finite element simulation for additive manufacturing of porous scaffolds, International Conference on Advances in Mechanical, Industrial, Automation and Management Systems (AMIAMS), MNNIT, Allahabad, pp. 333-336, 3-5 February, 2017, DOI: https://10.1109/AMIAMS.2017.8069234

DR. VISHWAS GROVER

[1] Grover V., Singh A.K. Improved design of Magnetorheological Honing Tool using Finite Element Analysis. 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR-2016), College of Engineering, Pune, pp. 1773–1777, 16-18 December, 2016.

[2] Kansal H.,Grover V., Singh A.K. Conceptualization of magnetorheological fluid assisted finishing process using permanent magnet.International Conference on Production and Industrial Engineering:CPIE 2016,Jalandhar,19-21, December, 2016.

[3] Kansal, H.,Grover, V., Singh A.K. Development of new magnetorheological nano-finishing tool using permanent magnets for flat surfaces, 39th International MATADOR conference on advanced manufacturing,University of Manchester, Manchester, United Kingdom,5-7July, 2017.
[4] Rana A.S., Bedi T.S.,Grover, V. A new permanent magnet type magnetorheological finishing tool for external cylindrical surfaces having different outer diameter,International Conference on Emerging Trends in Mechanical and Industrial Engineering(ICETMIE),North Cap Univerisity,Gurgaon,10-11 October, 2019.

[5] Rana A.S., Bedi T.S.,Grover V. Fine finishing of stepped cylindrical workpiece using magnetorheological finishing technique. International Conference on Advancements and Futuristic Trends in Mechanical and Materials Engineering, AFTMME, Indian Institute of Engineering and Technology, Ropar, 5-7 December, 2019.

[6] Kansal H, Jain A.,Grover V. Micro drilling and drilling with nano-materials: A review. 4th National conference on advancements in simulation and experimental techniques in mechanical engineering (NCASEme-2017), Chandigarh University, Chandigarh, 2017.

[7] Singh M,Grover V. Magnetorheological fluid and its importance in external cylindrical finishing processes- A review. National Conference on advanced concepts in mechanical engineering(ACME-2018)Ajay Kumar Garg Engineering College, Ghaziabad, 2018.

[8] Jain P.,Grover V. Condition monitoring of rotary machine parts.National Conference on Mechanical and Automation Engineering (MAAE-2020)Ajay Kumar Garg Engineering College, Ghaziabad, 2020.

RESEARCH PUBLICATIONS IN INTERNATIONAL JOURNALS

DR. NAMRATA GANGIL

[1] YJ Jie, S Kamaruddin, M Mustapha, AN Siddiquee, A Al-Ahmari, ZA Khan, M H Abidi, N Gangil,“Reclamation of steel shots by acid leaching for powder metallurgy applications”, Advances in Mechanical Engineering, vol.11, issue 7, pp1-9, 2019, indexed in SCIE (SAGE) ISSN: 1687-8140, IF-1.161, Doi: 10.1177/1687814019866961.

[2] N Gangil, H Nagar, R Kumar, D Singh, “Shape memory alloy reinforced magnesium matrix composite fabricated via friction stir processing”, Materials Today: Proceedings, indexed in SCOPUS (Elsevier), ISSN: 2214-7853,Doi: 10.1016/j.matpr.2020.04.172.

[3] AN Siddiquee, S Pandey, MH Abidi, A Al-Ahmari, NZ Khan, N Gangil,“Microstructural characterization and in-process traverse force during friction stir welding of austenitic stainless steel”, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, Vol. 234, issue 5, pp1031-1043, 2020, indexed in SCI (SAGE), IF- 1.386, ISSN 0954-4062, Doi: 10.1177/0954406219888238

[4] N Gangil, AN Siddiquee, S Maheshwari, “Investigation on the in-process traverse force evolution during surface composites fabrication on Al-Zn-Mg-Cu alloy through friction stir processing”, Materials Today: Proceedings, vol. 25, pp686-690, 2020, indexed in SCOPUS (Elsevier), ISSN: 2214-7853, Doi: 10.1016/j.matpr.2019.08.062.

[5] N Gangil, AN Siddiquee, S Maheshwari,“Investigation on friction stir welding of hybrid composites fabricated on Al-Zn-Mg-Cu alloy through friction stir processing” Journal of Materials Research and Technology,Vol. 8, issue 5, 3733-3740, 2019, indexed in SCIE (Elsevier), IF- 5.289, ISSN 2238-7854, Doi: 10.1016/j.jmrt.2019.06.033.

[6] X Chen, K Liu, W Guo, N Gangil, AN Siddiquee, S Konovalov, “The fabrication of NiTi shape memory alloy by selective laser melting: a review”, Rapid Prototyping Journal, Vol. 25, issue 8, pp1421-1432, 2019. Indexed in SCIE (Emerald) ISSN: 1355-2546, Doi: 10.1108/RPJ-11-2018-0292.

[7] Y Wang, X Chen, SV Konovolov, C Su, AN Siddiquee, N Gangil, J Vaghela,“In-situ wire-feed additive manufacturing of Cu-Al alloy by addition of silicon”, Applied Surface Science vol. 487, pp1366-1375, 2019, indexed in SCI (Elsevier), IF- 6.182, ISSN: 0169-4332, Doi: 10.1016/j.apsusc.2019.05.068.

[8] N Gangil, AN Siddiquee, S Maheshwari, Abdulrahman Al-Ahmari, MustufaHaiderAbidi, “State of the art of ex-situ aluminium matrix composite fabrication through friction stir processing”, Archive of Metallurgy and Materials, Vol. 63, issue, 2, pp719-738, 2018, indexed in SCIE (Polish academy of sciences), IF- 0.596, ISSN: 1733-3490, Doi: 10.24425/122398.

[9] N Gangil, S Maheshwari, AN Siddiquee, “Novel Use of Distribution Facilitators and Time–Temperature Range for Strengthening in Surface Composites on AA7050-T7451”, Metallography, Microstructure, and Analysis, vol. 7, issue 5, pp561-577, 2018, indexed in SCIE (Springer, ASM International), ISSN: 2192-9270, Doi: 10.1007/s13632-018-0474-x.

[10] N Gangil, S Maheshwari, AN Siddiquee, “Influence of tool pin and shoulder geometries on microstructure of friction stir processed AA6063/SiC composites”. Mechanics & Industry, vol. 19, issue 2, pp 211, 2018, indexed in SCIE (AFM &EDP Sciences), IF-0.874, ISSN: 2257-7777, Doi: 10.1051/meca/2018010.

[11] N Gangil, SMaheshwari, AN Siddiquee,“Multipass FSP on AA6063-T6 Al: Strategy to fabricate surface composites”. Materials and Manufacturing Processes, vol. 33, issue 7, pp 805-811, 2018, indexed in SCIE (Taylor & Francis),IF-3.046, ISSN: 1042-6914, Doi: 10.1080/10426914.2017.1415448

[12] N Gangil, S Maheshwari, AN Siddiquee, “Surface nanocomposite fabrication on AA6063 aluminium alloy using friction stir processing: An investigation in to the effect of the tool shoulder diameter on the composite microstructure”. Materials and Technology, vol. 52, issue 1, pp77-82, 2018, indexed in SCIE (IMT), IF-0.714, ISSN: 1580-2949, Doi:10.17222/mit.2017.172.

[13] N Gangil, S Maheshwari, EA Nasr, AM El-Tamimi, MA El-Meligy, Arshad Noor Siddiquee, “Another Approach to Characterize Particle Distribution during Surface Composite Fabrication Using Friction Stir Processing”, Metals, vol. 8, pp1-14, 2018, indexed in SCIE (MDPI), IF- 2.117, ISSN: 2075-4701, Doi: 10.3390/met8080568

[14] A Jacob, S Maheshwari, AN Siddiquee, N Gangil, “Improvements in strength and microstructural behaviour of friction stir welded 7475 aluminium alloy using in-process cooling”, Materials Research Express, vol. 5, issue 7, pp076518, 2018, indexed in SCIE (IOP Sciences), IF-1.929, ISSN: 2053-1591, Doi: 10.1088/2053-1591/aad0e6/meta.

[15] P Goel, NZ Khan, ZA Khan, A Ahmari, N Gangil, MHAbidi, AN Siddiquee,“Investigation on material mixing during FSW of AA7475 to AISI304”, Materials and Manufacturing Processes, vol. 34, issue 2, pp192-200, 2018, indexed in SCIE (Taylor & Francis), IF-3.046, ISSN: 1042-6914, Doi: 10.1080/10426914.2018.1544717.

[16] N Gangil, AN Siddiquee, S Maheshwari, “Aluminium based in-situ composite fabrication through friction stir processing: A review”. Journal of Alloys and Compounds.Vol. 715, pp 91-104, 2017, indexed in SCI (Elsevier), IF-4.65, ISSN: 0925-8388, Doi: 10.1016/j.jallcom.2017.04.309.

[17] T Chaudhary, AK Chanda, AN Siddiquee, N Gangil, “Effect of different dielectric fluids on material removal rate, surface roughness, kerf width and microhardness, Journal of the Brazilian Society of Mechanical Sciences and Engineering”, vol. 41, issue 8, pp344, 2019, indexed in SCIE (Springer), IF-1.755, ISSN: 1678-5878, Doi: 10.1007/s40430-019-1845-1

[18] N Gangil, SMaheshwari, AN Siddiquee, “An investigation on effect of tool rotational speed on AA6063/SiC surface composite fabrication via friction stir processing”. International Journal of Current Engineering and Scientific Research, vol 4, issue 6, pp 28-32, 2017, ISSN: 2393-8374.

[19] N Gangil, D Joshi,“Statistical Modelling of CO2 LASER Beam Welding of 20MnCr5 Alloy Steel”. International Journal of Mechanical Engineering and Robotics Research, vol. 3, issue 3, pp361, 2014, ISSN: 2278-0149.

DR. UMESH KUMAR VISHWAKARMA

[1] Vishwakarma, Umesh Kumar, Dvivedi, Akshay and Kumar, Pradeep, Comparative Study of Powder Mixed EDM and Rotary Tool EDM Performance during Machining of Al-SiC Metal Matrix Composites, International Journal of Machining and Machinability of Materials, Vol. 16, Issue 2, pp. 113-128, 2014. Indexed in SCOPUS, Impact factor: 3.0, ISSN: 1748-5711, DOI: https://doi.org/10.1504/IJMMM.2014.064684

[2] Vishwakarma U.K., Dvivedi A., Kumar P., Finite Element Modeling of Material Removal Rate in Powder Mixed Electric Discharge Machining of Al-SiC Metal Matrix Composites. In: Zhang L., Allanore A., Wang C., Yurko J.A., Crapps J. (eds) Materials Processing Fundamentals. Springer, Cham., 2013, pp. 151-158. Indexed in SCOPUS, ISSN: 978-3-319-48584-3, DOI: https://doi.org/10.1007/978-3-319-48197-5_17

[3] Vishwakarma, U. K., Dvivedi, A., Kumar, P. and Biswas, S., Parametric Investigation of Rotary Electrical Discharge Machining of Al-SiC Metal Matrix Composites Using Taguchi Method, International Journal of Advances in Management, Technology & Engineering Sciences, Vol. 2, Issue 6, pp. 116-120, 2013. ISSN: 2249-7455

[4] Vishwakarma, U. , Dvivedi, A. , Kumar, P., FEA Modeling of Material Removal Rate in Electrical Discharge Machining of Al6063/SiC Composites’. World Academy of Science, Engineering and Technology, Open Science Index 63, International Journal of Mechanical and Mechatronics Engineering, Vol. 6, Issue 3, pp. 586 – 591, 2012. Indexed in Google Scholar, ISSN: 1307-6892, DOI: doi.org/10.5281/zenodo.1082663

[5] Vishwakarma, U. K., Dvivedi, A. and Kumar, P. , Finite Element Modeling of Tool Wear Rate in Electrical Discharge Machining, VIVECHAN International Journal of Research, Vol. 3, pp. 25-31, 2012.

DR. SUMAN GOTHWAL

[1] S. Gothwal, and T. Raj, “A comparative study of multi-criteria decision making approaches for prioritizing the manufacturing systems,” International Journal of Process Management and Benchmarking, vol.9, issue 3, pp.277-299, 2019. Indexed in SCOPUS (Elsevier), ISSN: 1741-816X.

[2] S. Gothwal, and T. Raj, “Prioritizing the performance measures of FMS using multi-criteria decision making (MCDM) approaches,” International Journal of Process Management and Benchmarking, vol.8, issue 1, pp.59-78, 2018. Indexed in SCOPUS (Elsevier), ISSN: 1741-816X. DOI: 10.1504/IJPMB.2018.088657

[3] S. Gothwal, and T. Raj, “Optimization of AGV’s path layout in flexible manufacturing System (FMS) using 0-1 Linear Integer Programming,” International Journal of Process Management and Benchmarking, vol.8, issue 2, pp.182-205, 2018. Indexed in SCOPUS (Elsevier), ISSN: 1741-816X. DOI: 10.1504/IJPMB.2018.090796

[4] S. Gothwal, and T. Raj, “Conceptual Design and Development of pneumatically controlled flexible fixture and pallets,” International Journal of Services and Operations Management, vol.29, issue 2, pp.147-162, 2018. Indexed in SCOPUS (Elsevier), ISSN: 1744-2370. DOI: 10.1504/IJSOM.2018.089246

[5] S. Gothwal, and T. Raj, “Different aspects in design and development of flexible fixtures: review and future directions,” International Journal of Services and Operations Management, vol.26, issue 3, pp.386-410, 2017. Indexed in SCOPUS (Elsevier), ISSN: 1744-2370. DOI: 10.1504/IJSOM.2017.081944

[6] S. Gothwal, and T. Raj, “Analyzing the factors affecting the flexibility in FMS using Weighted Interpretive Structural Modeling (WISM) approach,” International Journal of System Assurance Engineering and Management, vol.8, issue 2, pp.408-422, 2017. Indexed in SCImago ( SCOPUS), ISSN: 0976-4348. DOI: 10.1007/s13198-016-0443-1

[7] S. Gothwal, and T. Raj, “Performance evaluation of flexible manufacturing system using diagraph and matrix/GTA approach,” International Journal of Manufacturing Technology and Management, vol.30, issue 3/4, pp.253-276, 2016. Indexed in SCOPUS (Elsevier), ISSN: 1741-5195. DOI: 10.1504/IJMTM.2016.077815

[8] S. Gothwal, and R. Saha, “Plant Location Selection of a Manufacturing Industry using Analytic Hierarchy Process (AHP) Approach,” International Journal of Services and Operations Management, vol.22, issue 2, pp.235-255, 2015. Indexed in SCOPUS (Elsevier), ISSN: 1744-2370. DOI: 10.1504/IJSOM.2015.071531

DR. ALOK VARDHAN

[1] A. Vardhan, Energy saving analysis of the hydrostatic drives used in the rotary head system of the blast hole drill rig, International Journal, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Sage, vol. 233, issue 5, pp.1086-1097, 2019. Indexed in SCIE, Impact factor: 1.606, ISSN: 0954-4089, DOI: https://doi.org/10.1177/0954408919836375

[2] A. K. Pandey, A. Vardhan, and K. Dasgupta, Theoretical and experimental studies of the steady-state performance of a primary and secondary-controlled closed-circuit hydrostatic drive, International Journal, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Sage, vol. 233, issue 5, pp.1024-1035, 2019.Indexed in SCIE, Impact factor: 1.606, ISSN: 0954-4089, DOI: https://doi.org/10.1177/0954408918821779

[3] A. Vardhan, K. Dasgupta, and S. K. Mishra, Dynamic analysis of a closed-circuit hydraulic drive system used in the rotary head of blasthole drilling machine using MATLAB–Simulink environment, International Journal, Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, Sage, vol. 233, issue 6, pp.702-719, 2019. Indexed in SCIE, Impact factor: 1.101, ISSN: 0959-6518, DOI: https://doi.org/10.1177/0959651818808870

[4] A. Vardhan, K. Dasgupta, N. Kumar, and S. K. Mishra, Steady-state performance investigation of open-circuit hydrostatic drives used in the rotary head of drill machine, International Journal, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, Sage, vol. 233, issue 1, pp.3-20, 2019. Indexed in SCIE, Impact factor: 1.606, ISSN: 0954-4089, DOI: https://doi.org/10.1177/0954408917738973

[5] A. Vardhan, and K. Dasgupta,Mapping the efficiency of the hydrostatic drive for the rotary head of drill machine using high-speed low-torque hydraulic motors, International Journal, Arabian Journal for Science and Engineering, Springer, vol. 43, issue 9, pp.4703-4712, 2018. Indexed in SCIE, Impact factor: 1.711, ISSN: 2193-567X, DOI: https://doi.org/10.1007/s13369-017-3038-5

[6] A. Vardhan, K. Dasgupta, and N. Kumar, Comparison of the steady-state performance of hydrostatic drives used in the rotary head of the drill machine. International Journal, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, vol. 39, issue 11, pp.4403-4419, 2017.Indexed in SCIE, Impact factor: 1.755, ISSN: 1678-5878, DOI:https://doi.org/10.1007/s40430-017-0803-z

[7] A. K. Pandey, K. Dasgupta, N. Kumar, and A. Vardhan, Leakage Analysis of Bent-axis Hydro-motors: An Experimental Study, International Journal, Journal of the Chinese Society of Mechanical Engineers, Chinese Mechanical Engineering Society, vol. 38, issue 1, pp.93-98, 2017. Indexed in SCIE, Impact factor: 0.274, ISSN: 0257-9731.

[8] A. Vardhan, K. Dasgupta, and M. Bhola, Experimental Study on the Steady-State Performance of Closed-Circuit Hydrostatic Transmission Drives for the Rotary Head of Blast Hole Drill Machine Using Different Capacities Bent Axis Hydro-Motor, International Journal, Advances in Engineering Design, Lecture Notes in Mechanical Engineering, Springer, pp. 93-103, 2019. Indexed in SCOPUS, ISBN: 978-981-13-6468-6, DOI:https://doi.org/10.1007/978-981-13-6469-3_9

[9] A. K. Pandey, A. Vardhan, Y. Kumar, and K. Dasgupta, Effect of Temperature and Pressure on the Leakage Flow Characteristics of the Bent Axis Hydro-Motors-An Experimental Study, International Journal, Advances in Fluid and Thermal Engineering, Lecture Notes in Mechanical Engineering, Springer, pp. 679-688, 2019. Indexed in SCOPUS, ISBN: 978-981-13-6415-0, DOI: https://doi.org/10.1007/978-981-13-6416-7_63

[10] H. Rowdur, M. Bhola, N. Kumar and A. Vardhan, Energy saving analysis using pilot operated counter balance valve, International Journal, Advances in Engineering Design, Lecture Notes in Mechanical Engineering, Springer, pp. 279-287, 2019. Indexed in SCOPUS, ISBN: 978-981-13-6468-6, DOI: https://doi.org/10.1007/978-981-13-6469-3_25

[11] R. Kumar, A. Vardhan, D. B. Kishorilal, and A. Kumar,Reliability analysis of a hydraulic shovel used in open pit coal mines, National Journal, Journal of Mines, Metals and Fuels, Books & Journals Private Ltd, vol. 66, issue 8, pp.472-477, 2018. Indexed in SCOPUS, ISSN: 0022-2755.

[12] A. Vardhan, A. Kumar, and K. Dasgupta,Effect of various parameters on the performance of the blasthole drilling, National Journal, Journal of Mines, Metals and Fuels, Books & Journals Private Ltd, vol. 65, issue 2, pp.49-54, 2017. Indexed in SCOPUS, ISSN: 0022-2755.

[13] A.Vardhan, A. Kumar, Y. Kumar, and K. Dasgupta,Development of dust control methodologies in continuous mining operation, National Journal,Journal of Mines, Metals & Fuels, Books & Journals Private Ltd, vol. 64, issue 11, pp.557-563, 2016. Indexed in SCOPUS, ISSN: 0022-2755.

[14] A.Vardhan, A. K. Pandey, K.Dasgupta, and N. Kumar,Selection of hydraulic components for body hoist control of dumper, National Journal,Journal of Mines, Metals & Fuels, Books & Journals Private Ltd, Vol. 64 issue 5 and 6, pp.148-154, 2016. Indexed in SCOPUS, ISSN: 0022-2755.

[15] A. Kumar, A.Vardhan,andR. Kumar,Necessity of GPS-based proximity warning system in mining industry-a tool to prevent mine transport accidents, National Journal,Minetech, CMPDI Publication, vol. 35, issue 1, pp.35-39, 2014. ISSN: 0970-7204.

DR. TARUN BHARDWAJ

[1] T. Bhardwaj and M. Shukla, Laser Additive Manufacturing-Direct Energy Deposition of Ti-15Mo Biomedical Alloy: Artificial Neural Network Based Modeling of Track Dilution,” International Journal, Lasers in Manufacturing and Materials Processing, Springer, vol. 7, issue 1, pp. 1 – 13, 2020. Indexed in SCOPUS, ISSN: 2196-7237, DOI: https://doi.org/10.1007/s40516-020-00117-z

[2] T. Bhardwaj, M. Shukla, C.P. Paul, N.K. Prasad and K.S. Bindra, Direct laser deposition – Additive manufacturing of Ti-15Mo alloy: Effect of build orientation induced surface topography on corrosion and bioactivity,” International Journal, Metals and Materials International, Springer, vol. 26, pp. 1015 – 1248, 2019. Indexed in SCI, Impact factor: 1.647, ISSN: 2005-4149, DOI: https://doi.org/10.1007/s12540-019-00464-3

[3] T. Bhardwaj, M. Shukla, C.P. Paul and K.S. Bindra, Direct Energy Deposition-Laser Additive Manufacturing of Titanium-Molybdenum alloy: Parametric studies, microstructure and mechanical properties,” International Journal, Journal of Alloys and Compounds, Elsevier, vol. 787, pp. 1238 – 1248, 2019. Indexed in SCI, Impact factor: 4.65, ISSN: 0925-8388,
DOI: https://doi.org/10.1016/j.jallcom.2019.02.121

[4] T. Bhardwaj and M. Shukla, Effect of laser scanning strategies on texture, physical and mechanical properties of laser sintered maraging steel,” International Journal, Materials Science and Engineering: A, Elsevier, Elsevier, vol. 734, pp. 102 – 109, 2018. Indexed in SCI, Impact factor: 4.652, ISSN: 0921-5093, DOI: https://doi.org/10.1016/j.msea.2018.07.089

DR. VISHWAS GROVER

[1] V. Grover, A. K. Singh,Modeling of surface roughness in a new magnetorheological honing process for internal finishing of cylindrical workpieces, International Journal of Mechanical Sciences,Elsevier,Vol. 144, pp. 679-695, 2018. Indexed in SCI, Impact factor: 4.134. DOI: 10.1016/j.ijmecsci.2018.05.058

[2] V. Grover,A. K. Singh,A novel magnetorheological honing process for nano-finishing of variable cylindrical internal surfaces. Materials and Manufacturing Processes,Taylor and Francis,vol. 32, issue 5, pp. 573-580, 2017. Indexed in SCI, Impact factor: 3.35, ISSN:1042-6914. DOI: 10.1080/10426914.2016.1257801

[3] V. Grover, A. K. Singh, Analysis of particles in magnetorheological polishing fluid for finishing of ferromagnetic cylindrical workpiece. Particulate Science and Technology, Taylor and Francis, vol.36, issue 7, pp. 799-807, 2018. Indexed in SCI, Impact factor: 1.424, ISSN: 0272-6351 DOI: 10.1080/02726351.2017.1302535

[4] V. Grover, A. K. Singh,Improved magnetorheological honing process for nano-finishing of variable cylindrical internal surfaces. Materials and Manufacturing Processes,Taylor and Francis, vol. 33, issue 11, pp. 1177-1187, 2018. Indexed in SCI, Impact factor: 3.35, ISSN:1042-6914. DOI: 10.1080/10426914.2017.1339322

[5] V. Grover, A. K. Singh, Improved design of magnetorheological honing tool based on finite element analysis and experimental examination of its performance, International Journal of Advanced Manufacturing Technology,Springer, vol.100,pp. 1067–1080, 2019. Indexed in SCIImpact factor: 2.496, ISSN:

[6] V. Grover, A. K. Singh, Modelling of surface roughness in magnetorheological cylindrical finishing process. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2017, Impact factor: 1.126.
DOI: 10.1177/0954408917746354

[7] H. Kansal,A. K. SinghMagnetorheological nano-finishing of diamagnetic material using permanent magnets tool. Precision Engineering, vol.51, pp. 30-39, 2018, Impact factor: 2.685. DOI: 10.1016/j.precisioneng.2017.07.003

[8] V. Grover, A. K. Singh,Parametric optimization of a newly developed magnetorheological honing process for internal finishing of cylindrical workpieces, Engineering Research Express 2, 2019.
DOI: 10.1088/2631-8695/ab551c

Seminar, Conference and FDPs Organised

Date

Topic

Name

Brochure

Report

  07 - 08 Sep 2018

 

Advanced Concepts in Mechanical Engineering National Conference  Brochure View

22 - 23 Sep 2017

Unconventional Manufacturing Technology

National Conference

Brochure

View

12 - 19 Jun 2017

Machine Design

FDP

 

 

25 Feb & 15 Mar 2017

Manufacturing Technology

FDP

 

 

10 Aug 2016

Seminar on Entrepreneurship by Sh. S.K Agarwal (Chairman & Founder of Vimal Organics Ltd, Gzb)

Seminar

 

 

20-27 Jun 2016

Mechanics of Solids

FDP

 

 

29 & 30 April 2016

Innovative Concepts in Mechanical Engineering

National Conference

 

 

20th to 27th June 2016

Mechanics of Solids

FDP

 

 

19 Sep & 3 Oct 2015

Thermal Engineering

FDP

 

 

11-12 Dec 2014

Engineering Mechanics

FDP

 

 

04-05 April 2014

Recent Advances in Mechanical and Civil Engineering

National Conference

 

 

27-28 July 2012

Emerging Trends in Mechanical Engineering (ETME-2012)

National Conference

 

 

WORKSHOP / FDP / TRAININGS / CONFERENCE (NATIONAL / INTERNATIONAL) ATTENDED BY FACULTY

(EVEN SEM 2020-21)

Faculty Name Conference / Seminar / Workshop / FDP Duration Organizer
Dr. AlokVardhan FDP on “Energy Engineering” 4th Jan 2021 to 8th Jan 2021 G.L. Bajaj Institute of Technology and Management.
Dr. AlokVardhan Faculty Development Programme for Student Induction (FDP-SI) 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. NirmalGarg Faculty Development Programme for Student Induction (FDP-SI) 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. Vikash Kumar Faculty Development Programme for Student Induction (FDP-SI) 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. Vivek Singh Faculty Development Programme for Student Induction (FDP-SI) 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. Vikram Singh Rajput Faculty Development Programme for Student Induction (FDP-SI) 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. Pradeep Jain FDP on “Internet of Things (IoT) 8th Feb 2021 to 12th Feb 2021 I.T.S. Engineering College, Greater Noida.
Mr. NirmalGarg Faculty Development Programme on “Computational Fluid Dynamics for Heat and Fluid Flow Applications 22nd Feb 2021 to 26th Feb 2021 Raj Kumar Goel Institute of Technology (Sponsored by AKTU, Lucknow)
Dr. TarunBhardwaj

Mr. Pradeep Jain

Dr. Devendra Singh

International Conferences on Advances in Materials, Mechatronics and Manufacturing 06-07 Mar 2021
Dr. NamrataGangil

Dr. SumanGothwal

Mr. JitendraYadav

Mr. AnshulPanchbhaiya

FDP on “design, manufacturing & safety” 14-18 June 2021 RJIT BSF Academy, Tekanpur, MP
Mr. NirmalGarg Innovation Ambassador Training 31st Jul2021 to 30th Aug 2021 MoE’s Innovation Cell & AICTE, New Delhi
Mr. H.S. Chaursiya

Mr. Gajesh Kumar

Mr. NirmalGarg

UHVPE (Refresher) 1st Sep 2021 to 8th Sep 2021. Ajay Kumar Garg Engineering College, Ghaziabad

(ODD SEM 2020-21)

Faculty Name Conference / Seminar / Workshop / FDP Duration Organizer
Mr. NirmalGarg International Faculty Development Programme (IFDP) on “Innovative and Entrepreneurial Eco-system in Engineering for Post COVID-19 Pandemic” 27th Jul 2020 to 31st Jul 2020. Sagar Institute of Research and Technology, Bhopal
Mr. NirmalGarg workshop on Universal Human Value on the theme “Inculcating Universal Human Values in Technical Education” 19th Aug 2020 to 23rd Aug 2020. All India Council for Technical Education (AICTE)
Mr. NirmalGarg Virtual (online) Trainers’ Training Programme on Entrepreneurship 24th Aug to 28th Aug 2020 Entrepreneurship Development Institute of India (EDII), Ahmedabad.
Mr. NirmalGarg Natinoal IP Literacy week organized under KalamProgramme for IP Literacy and Awareness 15th Oct 2020 to 23rd Oct 2020.
Dr. AokVardhan Ist International Conference on “Energy, Materials Sciences & Mechanical Engineering-2020 (EMSME-2020)” 30th Oct 2020 to 1st Nov 2020 National Institute of Technology, Delhi.
Mr. Pradeep Jain Short Term Training Programme on “Rapid Prototyping and Digital Manufacturing” 2nd Nov 2020 to 7th Nov 2020. NSS College of Engineering, Palakkad
Dr. AlokVardhan Faculty Development Programme on “Finite Element Methods” 23rd Nov 2020 to 27th Nov 2020. Ajay Kumar Garg Engineering College, Ghaziabad
Dr. SumanGothwal Faculty Development Programme on “Finite Element Methods” 23rd Nov 2020 to 27th Nov 2020. Ajay Kumar Garg Engineering College, Ghaziabad
Dr. TarunBhardwaj Faculty Development Programme on “Finite Element Methods” 23rd Nov 2020 to 27th Nov 2020. Ajay Kumar Garg Engineering College, Ghaziabad
Mr. Anshul Kumar Panchbhaiya Faculty Development Programme on “Finite Element Methods” 23rd Nov 2020 to 27th Nov 2020. Ajay Kumar Garg Engineering College, Ghaziabad
Dr. NamrataGangil Faculty Development Programme on “Finite Element Methods” 23rd Nov 2020 to 27th Nov 2020. Ajay Kumar Garg Engineering College, Ghaziabad
Mr. NirmalGarg Faculty Development Programme on “Finite Element Methods” 23rd Nov 2020 to 27th Nov 2020. Ajay Kumar Garg Engineering College, Ghaziabad
Dr. Devendra Singh webinar on “Intellectual Property Rights 8th Dec 2020 IDEA Lab AKGEC
Mr. NirmalGarg webinar on “Intellectual Property Rights 8th Dec 2020 IDEA Lab AKGEC
Dr. SumanGothwal webinar on “Intellectual Property Rights 8th Dec 2020 IDEA Lab AKGEC
Dr. Devendra Singh Faculty Development Programme on “Fundamentals and Applications of Additive Manufacturing 21-25 Dec 2020 Rajkiya Engineering College, Mainpuri
Dr. NamrataGangil E-Faculty Development Programme on “Application of Tehrmal Engineering in Manufacturing Industry” 21st Dec to 25th Dec 2020. Govt. Engg. College, Raipur (CG) and Rustamji Institute of Technology, Tekanpur (MP)
Dr. AlokVardhan online Faculty Development Programme on “Fundamentals and Applications of Additive Manufacturing 21-25 Dec 2020 Rajkiya Engineering College, Mainpuri
Dr. SumanGothwal Faculty Development Programme on “Fundamentals and Applications of Additive Manufacturing 21-25 Dec 2020 Rajkiya Engineering College, Mainpuri
Mr. Pradeep Jain faculty Development Programme on“Fundamentals and Applications of Additive Manufacturing 21st Dec 2020 to 25th Dec 2020 Dr. APJ Abdul Kalam Technical University, Lucknow.
Mr. NirmalGarg faculty Development Programme on“Fundamentals and Applications of Additive Manufacturing 21st Dec 2020 to 25th Dec 2020 Dr. APJ Abdul Kalam Technical University, Lucknow.
Mr. Dr. TarunBhardwaj faculty Development Programme on“Fundamentals and Applications of Additive Manufacturing 21st Dec 2020 to 25th Dec 2020 Dr. APJ Abdul Kalam Technical University, Lucknow.
Dr. Devendra Singh workshop on “Finite Element Methods (FEM) for Engineers” 26-30 Dec 2020 AKGEC, Ghaziabad.
Dr. Devendra Singh webinar on “Entrepreneurship and Innovation as Career Opportunity” 29th Dec 2020 IDEA Lab, AKGEC
Mr. NirmalGarg webinar on “Entrepreneurship and Innovation as Career Opportunity” 29th Dec 2020 AKGEC, Ghaziabad
Mr. Anshul Kumar Panchbhaiya workshop under TEQIP-III (RTU-ATU) on “Finite Element Methods (FEM for engineers)” 26th Dec 2020 to 30th Dec 2020 University Departments, Rajasthan
Mr. H.S. Chaurasiya workshop under TEQIP-III (RTU-ATU) on “Finite Element Methods (FEM for engineers)” 26th Dec 2020 to 30th Dec 2020 University Departments, Rajasthan
Dr. TarunBhardwaj workshop under TEQIP-III (RTU-ATU) on “Finite Element Methods (FEM for engineers)” 26th Dec 2020 to 30th Dec 2020 University Departments, Rajasthan
Dr. AlokVardhan AICTE Training And Learning (ATAL) Academy online FDP on “Energy Engineering” 4th Jan 2021 to 8th Jan 2021 G.L. Bajaj Institute of Technology and Management
Mr. Pradeep Jain AICTE Training And Learning (ATAL) Academy online FDP on “Internet of Things (IoT)” from 8th Feb 2021 to 12th Feb 2021 I.T.S. Engineering College, Greater Noida
Mr. Pradeep Jain FDP under ATAL scheme 2020 on “Additive Manufacturing and Industrial Scopes & Applications” NoidaInstitue of Engineering & Technology, Greater Noida.
Mr. NirmalGarg Faculty Development Programme for Student Induction (FDP-SI)” 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Dr. AlokVardhan Faculty Development Programme for Student Induction (FDP-SI)” 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. NirmalGarg Faculty Development Programme for Student Induction (FDP-SI) 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. Vikash Kumar Faculty Development Programme for Student Induction (FDP-SI) 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. Vivek Singh Faculty Development Programme for Student Induction (FDP-SI) 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. Vikram Singh Rajput Faculty Development Programme for Student Induction (FDP-SI) 8th Feb to 15th Feb 2021 Ajay Kumar Garg Engineering College, Ghaziabad.
Mr. NirmalGarg Faculty Development Programme on “Computational Fluid Dynamics for Heat and Fluid Flow Applications” 22nd Feb 2021 to 26th Feb 2021 Raj Kumar Goel Institute of Technology

(EVEN SEM 2019-20)

Faculty Name Conference / Seminar / Workshop / FDP Duration Organizer
Mr. Pradeep Jain workshop on “3D Printing & Design” 20-24 Jan 2020 J.C. Bose University of Science and Technology YMCA, Faridabad organized AICTE sponsored (AICTE Training & Learning ATAL).
Prof PallabBiswas workshop on “Outcome Based Education and NBA Accreditation” 29-30 Jan 2020 Dr. A.P.J. Abdul Kalam Technical University Noida Campus.
Mr. NirmalGarg workshop on “Education Professional’s Development Programme on Entrepreneurship Course Curriculum Design, Development and Teaching” 21-23 Feb 2020. EDII Ahmedabad Gujarat
Dr. Devendra Singh online course Examination Reforms 29 Apr 2020 to 02 May 2020 AICTE
Prof I P Sharma online course Examination Reforms 29 Apr 2020 to 02 May 2020 AICTE

(ODD SEM 2019-20)

Faculty Name Conference / Seminar / Workshop / FDP Duration Organizer
Dr. Kamal Kumar Mittal Training Programme on “Technical/Engineering Drawing 9-13 July 2019 IIT Kanpur
Mr. Neeraj Gupta Training Programme on “Technical/Engineering Drawing 9-13 July 2019 IIT Kanpur
Mr. Vivek Kumar Pansari FDP on Mechanics of Solids (MOS-2019) 15-19 July 2019 AKTU Lucknow
Dr. Aviral Misra FDP on Mechanics of Solids (MOS-2019) 15-19 July 2019 AKTU Lucknow
Dr. Vishwas Grover Workshop on Manufacturing for Industry 4.0 15-19 July 2019 Indian Institute of Technology, Ropar
Mr. Dilip Kumar FDP on Solar Energy – A Sustainable Future 15-19 July 2019 IPEC, Ghaziabad
Dr. Namrata Gupta Seminar on Emerging Trends in Welding Technology and Welding Education 9 August 2019 Jawahar Lal Nehru University
Dr. Vishwas Grover Training programme on Manufacturing Process 21-25 August 2019 IIT Kanpur
Dr. Umesh Kr. Vishwakarma Training programme on Manufacturing Process 21-25 August 2019 IIT Kanpur
Dr. Aviral Misra Seminar 20 August 2019 IAF
Mr. Nirmal Garg Seminar 20 August 2019 IAF
Ms. Priyanshu Sharma Seminar 20 August 2019 IAF
Prof I P Sharma International Conference on Energizing Indian Aerospace Industry: Flight Plan for the Future 5-6 September 2019 IAF
Dr. Aviral Misra International Conference on Energizing Indian Aerospace Industry: Flight Plan for the Future 5-6 September 2019 IAF
Mr. Pradeep Jain Training programme on Product Realization using 3D Printing 28 September – 2 October 2019 IIT, Kanpur
Dr. Vishwas Grover International conference on Emerging Trends in Mechanical and Industrial Engineering (ICETMIE-2019) 10-11 October 2019 North Cap University (NCU), Gurugram
Dr. Kamal Kumar Mittal International conference on 19th Global Conference on Flexible Systems Management (GLOGIFT-19) 6-8 December 2019 at IIT Roorkee
Mr. Pradeep Jain Workshop on The Art of Building Competitive Advantage for Academics Using Ansys Simulation Technology 29 November 2019
Dr. Pallab Biswas FDP on Values Relationship & Ethics Human Conduct 20-29 December 2019 IIT Kanpur
Dr. Kamal Kumar Mittal FDP on Values Relationship & Ethics Human Conduct 20-29 December 2019 IIT Kanpur
Mr. Amit Kumar Tripathi FDP on Values Relationship & Ethics Human Conduct 20-29 December 2019 IIT Kanpur
Dr. Devendra Singh FDP on  Human Values and Professional Ethics 2-12 December 2020 AKTU Lucknow
Prof. I P Sharma FDP on  Human Values and Professional Ethics 2-12 December 2020 AKTU Lucknow

(EVEN SEM 2018-19)

Faculty Name Conference / Seminar / Workshop / FDP Duration Organizer
Dr. Umesh K. Vishwakarma FDP on UHVPE 7-14 January 2019 ABES Engg. College, Ghaziabad
Dr. Aviral Mishra FDP on UHVPE 7-14 January 2019 ABES Engg. College, Ghaziabad
Mr. Vishwas Grover FDP on UHVPE 7-14 January 2019 ABES Engg. College, Ghaziabad
Ms. Sunita Tiwari FDP on UHVPE 7-14 January 2019 ABES Engg. College, Ghaziabad
Dr. Pallab Biswas FDP on UHVPE 25 June -2 July 2019 IPEC, Ghaziabad
Mr. Dilip Kumar FDP on UHVPE 25 June -2 July 2019 IPEC, Ghaziabad
Dr. Suman Gothwal FDP on UHVPE 4-11 July 2019 IPEC, Ghaziabad
Dr. Kamal Kumar Mittal FDP 29 January – 2 Feb 2019 GL Bajaj, Greater Noida
Dr. Aviral Mishra FDP on Additive Manufacturing or Robotics and Automation 18 March 2019 AKTU Lucknow
Dr. Kamal Kumar Mittal Workshop on Design Thinking-Simplified 30 March 2019 AKTU Noida Campus

Name

Name of FDPs/Conferences /Seminars/Workshops

Duration

Place of Registration

Dr. Kamal kumar mittal Modern Thermal power Gernation Technology 29th Jan.2019 - 2nd feb.2019 G.L.Bajaj institute of Technology Greater Noida
Mr. Ashutosh yadav Entrepreneurship Developement 10th Dec.2018 - 21st Dec 2018 I.T.S Engineering college Greater Noida.

Mr. Dilip Kumar

Workshop on Human Values and Professional Ethics

13- 20 Dec 2017

Hindustan College of Science and Technology, Mathura

Mr. Pallab Biswas

Summit at India International Centre

8 Dec 2017

Centre for Education Growth and Research (CEGR)

Dr. Devendra Singh

Workshop on Human Values and Professoinal Ethics

30th Nov.-7 Dec 2017

ABES Engineering College, Ghaziabad

Mr. Amit Kumar Tripathi

FDP on "IC Engines & Compressors"

10-14 Jul 2017

KIET Ghaziabad

Mr. Ashutosh Yadav

FDP on "IC Engines & Compressors"

10-14 Jul 2017

KIET Ghaziabad

Mr. Shitanshu Arya

FDP

05 Jun 2017-09 Jun 2017

KEC Ghaziabad

Mr. Rajat Goel

FDP

05 Jun 2017-09 Jun 2017

KEC Ghaziabad

Mr. Amit Kumar Tripathi

FDP on HVPE

26 Dec 2016-2 Jan 2017

ABES Ghaziabad

Mr. Ashutosh Yadav

FDP on Manufacturing Science & Technology

18-22 July 2016

ABES Ghaziabad

Mr. Rajat Goel

FDP on Manufacturing Science & Technology

18-22 July 2016

ABES Ghaziabad

Mr. Pallab Biswas

Conference on Entrepreneurship: Learning and implementation

16 May 2015

IMS Ghaziabad

Prof I P Sharma

Conference on Entrepreneurship: Learning and implementation

16 May 2015

IMS Ghaziabad

Mr. Gajesh Kumar

FDP on Technical Teachers: Role, Self Esteem Motivation and Professionalism Development

8-12 June 2015

AKGEC, Ghaziabad

Mr. Yogendra Dwivedi

FDP on Technical Teachers: Role, Self Esteem Motivation and Professionalism Development

8-12 June 2015

AKGEC, Ghaziabad

Prof I P Sharma

3rd National Conference on Information Technology for Business Transformation (ITBT'15)

20-21 Mar 2015

AKGEC, Ghaziabad

Mr. Rakesh V. Mishra

International conference HWWE-2014

3-5 Dec 2014

IIT Guwahati

Faculty Seminars

(EVEN SEM 2020-21)

DATE TOPIC OF SEMINAR FACULTY NAME
13.02.2021 OUTCOME BASED EDUCATION – II DR. DEVENDRA SINGH (HOD)
27.02.2021 SUPPLY CHAIN MANAGEMENT – RESEARCH AVENUES DR. PALLAB BISWAS
26.06.2021 INTRODUCTION TO CFD PROF. PRAMOD BHATIA
27.02.2021 3-D PRINTING LATEST TRENDS MR. PRADEEP JAIN
13.02.2021 CO – EXISTANCE IN IN EXISTENSE MR. VIVEK KR. PANSARI
24.04.2021 FRACTUAL ROBOT MR. AJAY KANT DUBEY
24.04.2021 HUMAN VALUES MR. H.S.CHAURASIYA
15.05.2021 WELDING PROCESS MR. JITENDRA YADAV
15.05.2021 ANT COLONY OPTIMIZATION MR. GAJESH KUMAR
29.05.2021 4-D PRINTING MR. ANKUR TYAGI
29.05.2021 HYDROXYAPATITE IN DENTAL APPLICATION MR. AMIT KUMAR TRIPATHI
12.06.2021 PERFORMANCE OF TURBULENCE MODELING IN ROUGH PIPE MR. DILIP KUMAR
12.06.2021 CRYOGENIC GRINDING MR. ASHUTOSH YADAV
26.06.2021 LI – ION BATTERY MR. BHARTENDU M. TRIPATHI
10.07.2021 IPR FILING PROCESS MR. NIRMAL GARG
10.07.2021 MODELING & SIMULATION OF DYNAMICSYSTEMS MR. MAYANK KR. TIWARI
24.07.2021 MATHEMATICAL MODELING OF OPTIMUM CONFIGURATION SELECTION IN RECONFIGURABLE MANUFACTURING SYSTEM DR. KAMAL KR. MITTAL
24.07.2021 ADVANCED MATERIALS DR. UMESH KUMAR VISHWAKARMA
05.06.2021 MCDM TECHNIQUES IN FMS DR. SUMAN GOTHWAL
19.06.2021 RECENT ADVANCEMENTS IN SHAPE MEMORY ALLOY METAL MATRIX COMPOSITES DR. NAMRATA GUPTA
19.06.2021 MAGNETORHEOLOGICAL FINISHING DR. VISHWAS GROVER
03.07.2021 HYDRAULICS – A BRIEF INTRODUCTION DR. ALOK VARDHAN
03.07.2021 DRIVER FATIQUE – VEHICLE CHARACTERISTICS – INVESTIGATION & SUGGESTION MR. ANSHUL KUMAR PANCHBHAIYA

(ODD SEM 2020-21)

DATE TOPIC OF SEMINAR FACULTY NAME
30.01.2021 INTRODUCTION OF OUTCOME BASED EDUCATION DR. DEVENDRA SINGH (HOD)
30.01.2021 COVID-19 – SUPPLY CHAIN ISSUES DR. PALLAB BISWAS
30.01.2021 METAL 3-D PRINTING TECHNOLOGIES MR. PRADEEP JAIN
21.11.2020 INHERENT INTERCONNECTEDNESS AND CO-EXISTENCE MR. VIVEK KR. PANSARI
19.12.2020 FRACTAL ROBOT MR. AJAY KANT DUBEY
14.11.2020 INTRODUCTION TO DESIGNING ELASTERIC VIBRATION ISOLATIONS MR. H.S.CHAURASIYA
14.11.2020 FRICTION STIR WELDING MR. JITENDRA YADAV
19.12.2020 MONTE CARLO SIMULATION MR. GAJESH KUMAR
07.11.2020 AUGMENTED AND VIRTUAL REALITY IN SMART MANUFACTURING MR. ANKUR TYAGI
31.10.2020 BIO COMPOSITE MATERIALS MR. AMIT KUMAR TRIPATHI
31.10.2020 RECENT ADVANCEMENTS IN SOLAR COOKERS MR. DILIP KUMAR
24.10.2020 BASIC AUTOMOTIVE TECHNOLOGY MR. ASHUTOSH YADAV
24.10.2020 POWER QUALITY STANDARDS MR. BHARTENDU M. TRIPATHI
17.10.2020 INTELLECTUAL PROPERTY RIGHTS: LEGAL AND ETHICAL STEPS MR. NIRMAL GARG
17.10.2020 ERGONOMICS MS. AKRITI GUPTA
10.10.2020 INTRODUCTION OF FEM USING MATLAB MR. MAYANK KR. TIWARI
10.10.2020 A SYSTEMATIC APPROACH OF SELECTION OF MANUFACTURING SYSTEM DR. KAMAL KR. MITTAL
03.10.2020 COMPARATIVE STUDY OF MCDM APPROACHES FOR PRIORITIZING THE PERFORMANCE AFFECTING VARIABLES DR. SUMAN GOTHWAL
03.10.2020 ALUMINUM BASED IN-SITU COMPOSITE FABRICATION VIA FSP DR. NAMRATA GANGIL
26.09.2020 NUCLEAR POWER PLANT DR. VISHWAS GROVER
26.09.2020 HYDRAULICS – A BRIEF INTRODUCTION DR. ALOK VARDHAN
19.09.2020 OPTIMAL DESIGN OF THE FLYWHEEL USING NATURE INSPIRED OPTIMIZATION ALGORITHMS MR. ANSHUL KUMAR PANCHBHAIYA
19.09.2020 ADDITIVE MANUFACTURING – PRESENT AND FUTURE DR. TARUN BHARDWAJ

(EVEN SEM 2019-20)

DATE TOPIC OF SEMINAR FACULTY NAME
25.01.2020 NON PNEUMATIC TYRES (TWEELS) DR. DEVENDRA SINGH (HOD)
22.02.2020 ADVANCES IN ADDITIVE MANUFACTURING MR. PRADEEP JAIN
22.02.2020 OUTCOME BASED EDUCATION (OBE) DR. PALLAB BISWAS
22.02.2020 SUSTAINABLE MANUFACTURING MR. VIVEK KR. PANSARI
20.06.2020 EXERGY ANALYSIS OF POWER PLANT  MR. AJAY KANT DUBEY
20.06.2020 PARANOMRAL, SUPERNATURAL & HUMAN VALUES MR. H.S.CHAURASIYA
27.06.2020 FSP MR. JITENDRA YADAV
20.06.2020 SENSIVITY ANALYSIS OF LPP  MR. GAJESH KUMAR
09.07.2020 A GAZE IN TO CRYSTAL BALL: BIOMEMATICS A FUTURE TECHNOLOGY MR. ANKUR TYAGI
04.07.2020 POWDER METALLURGY MR. AMIT KUMAR TRIPATHI
04.07.2020 TURBULENCE MODEL MR. DILIP KUMAR
25.07.2020 BASICS OF AUTOMOBILE ENGINEERING MR. ASHUTOSH YADAV
25.07.2020 FUNDAMENTALS OF PEM FUEL CELL  MR. BHARTENDU M. TRIPATHI
09.07.2020 MODELLING AND SIMULATION OF DYNAMIC SYSTEMS: A BOND GRAPH APPROACH MR. NIRMAL GARG
08.08.2020 INVENTORY CONTROL WITH WAGNER WITHIN ALGORITHM MS. AKRITI GUPTA
08.08.2020 BIO COMPRESSED NATURAL GAS MR. MAYANK KR. TIWARI
22.08.2020 OPTIMIZATION TECHNIQUE OF MANUFACTURING SYSTEMS DR. KAMAL KR. MITTAL
22.08.2020 MODELLING OF VARIOUS FACTORS AFFECTING THE PRODUCTIVITY OF FMS DR. SUMAN GOTHWAL
29.08.2020 AN OVERVIEW ON MECHANISM AND LATEST APPLICATIONS OF SMAS DR. NAMRATA GUPTA
29.08.2020 UNCONVENTIONAL MACHINING PROCESSES MR. VISHWAS GROVER
04.07.2020 PERFORMANCE INVESTIGATION OF HYDRAULIC DRIVE SYSTEM USED IN BLASTHOLE DRILL RIG MR. ALOK VARDHAN
27.06.2020 RESPONSE SURFACE METHODOLOGY  DR. TARUN BHARDWAJ
27.06.2020 DRIVER FATIQUE – VEHICLE CHARACTERISTICS –

INVESTIGATION AND SUGGESTION

MR ANHSUL KUMAR

(ODD SEM 2019-20)

DATE  

TOPIC OF SEMINAR

 

FACULTY NAME
23 November 2019 ADVANCED MATERIALS PROF. I.P. SHARMA
23 November 2019 STRESS ANALYSIS USING TENSORS PROF. G.P. DUBE
23 November 2019 PNEUMATIC TYRE DR. DEVENDRA SINGH
23 November 2019 DOUBLE EXTRUDER – 3D PRINTER MR. PRADEEP JAIN
23 November 2019 OUTCOME BASED EDUCATION – REVIEW DR. PALLAB BISWAS
9 November 2019 SUSTAINABLE MANUFACTURING MR. VIVEK KR. PANSARI
9 November 2019 POWER PLANT ECONOMIC MR. AJAY KANT DUBEY
9 November 2019 RE – INFORCED COMPOSITE MR. H.S.CHAURASIYA
12 October 2019 FABRICATION OF MG BASED SURFACE COMPOSITE THROUGH FSP MR. JITENDRA YADAV
12 October 2019 SENSITIVITY ANALYIS MR. GAJESH KUMAR
12 October 2019 ROBOTIC END EFFECTOR MR. ANKUR TYAGI
12 October 2019 COMPOSITE MATERIALS MR. AMIT KUMAR TRIPATHI
28 September 2019 TURBULENCE MODEL IN ROUGH PIPE MR. DILIP KUMAR
28 September 2019 UNCONVENTIONAL I.C. ENGINE MR. ASHUTOSH YADAV
28 September 2019 PEM FUEL CELL MR. BHARTENDU M. TRIPATHI
28 September 2019 ADVANCEMENT IN BOND GRAPH MR. NIRMAL GARG
14 September 2019 BLOCK MAKING MACHINE MR. RAJAT GOEL
14 September 2019 NANO-FLUID HEAT PIPE MS. AKRITI GUPTA
14 September 2019 SUSTAINABLE DEVELOPMENT MR. MAYANK KR. TIWARI
14 September 2019 PAST FAMILY FORMATION DR. KAMAL KR. MITTAL
24 August 2019 TAGUCHI DR. UMESH VISHWAKARMA
24 August 2019 FLEXIBLE FIXTURE DR. SUMAN GOTHWAL
24 August 2019 FRICTION STIR PROCESSIGN: A WAY TO SURFACE COMPOSITE FABRICATION DR. NAMRATA GUPTA
10 August 2019 MACHINE LEARNING IN MANUFACTURING MS. SUNITA TIWARI
10 August 2019 ADVANCED FINISHING PROCESSES MR. VISHWAS GROVER
9 November 2019 WELDING TECNIQUES MR. NARENDRA KUMAR
10 August 2019 SUPPLY CHAIN MANAGEMENT & CIRCULAR ECONOMY MS. PRIYANSHU SHARMA
10 August 2019 HYDROSTATIC DRIVE MR. ALOK VARDHAN
24 August 2019 ABRASIVE FINISHING TECHNOLOGY DR. AVIRAL MISHRA

(EVEN SEM 2018-19)

DATE  

TOPIC OF SEMINAR

 

FACULTY NAME
30 May 2019 Human Thought Process, Health & Performance Prof. I.P. Sharma
30 May 2019 Kinematics of Gear Dr. Devendra Singh
25 May 2019 Advancement of Additive Manufacturing Mr. Pradeep Jain
10 May 2019 Outcome Based Education Dr. Pallab Biswas
10 May 2019 Eddy Current Testing of Rail Mr. Narender Kumar
10 May 2019 Sustainable Manufacturing Mr. Vivek Kr. Pansari
10 May 2019 Global Warming Mr. Ajay Kant Dubey
10 May 2019 Welding in Space Mr. H.S.Chaurasiya
10 May 2019 Bio Diesel Mr. Jitendra Yadav
27 April 2019 Monte Carlo Simulation Mr. Gajesh Kumar
10 May 2019 Electric Vehicle Mr. Mayank Agrawal
29 March 2019 Industry 4.0 Mr. Ankur Tyagi
10 May 2019 Unconventional Machining Process Mr. Amit Kumar Tripathi
27 April 2019 Rotating Wear Test Rig Mr. Dilip Kumar
23 March 2019 Circular Economy Mr. Neeraj Gupta
9 March 2019 Non Conventional Internal Combustion Engine Mr. Ashutosh Yadav
9 March 2019 Fundamental of Li-ion Battery Mr. Bhartendu Mani Tripathi
9 March 2019 Introduction to Bond Graph Mr. Nirmal Garg
9 March 2019 E-Bike Mr. Rajat Goel
9 March 2019 Solution of Linear Equations Mr. Mayank K. Tiwari
9 March 2019 Mechanical Advances Ms. Akriti Gupta
23 February 2019 Clustering Methodology of Products in Manufacturing System Dr. Kamal Mittal
23 February 2019 Non-Conventional Techniques Dr. Umesh Vishwakarma
23 February 2019 Flexible Fixture & Pallet Dr. Suman Gothwal
9 February 2019 Rapid Prototyping Dr. Aviral Misra
9 February 2019 Annealing of Cold Worked Metals Ms.. Namrta Gupta
9 February 2019 Optimization Techniques Ms. Sunita Tiwari
9 February 2019 Advance Finishing Dr. Vishwas Grover

Session (2018-2019) Odd Semester

FACULTY NAME

DATE

TOPIC OF SEMINAR

Dr. Umesh K. Vishwakarma 13th Oct 2018 Composite Materials
Dr. Suman Gothwal 13th Oct 2018 Flexible manucaturing system
Dr. Anuj Kumar 13th Oct 2018 Savonius Hydrokinetic turbine
Mr. Ankur Tyagi 13th Oct 2018 Advanced Concepts in Mechanical
Mr. Mayank K. Tiwari 13th Oct 2018 Steps taken for Environment
Ms. Akriti Gupta 13th Oct 2018 Kalina Cycle
Ms. Pallavi Pant 13th Oct 2018 Smart Materials
 Dr. Kamal K. Mittal 13th Oct 2018 Optimization of manufacturing systems
Mr. Jitendra Yadav 22nd Sep 2018 Bio - diesel 
Mr. Gaurav Tripathi 22nd Sep 2018 Nano Technology
Mr. Gajesh Kumar 22nd Sep 2018 Supply chain management
Mr. Mayank Agrawal 22nd Sep 2018 Self healing materials
Mr. Bhartendu M. Tripathi 22nd Sep 2018 Building better batteries
Mr. Amit K. Tripathi 22nd Sep 2018 Bio - Materials
Mr. Dilip Kumar 22nd Sep 2018 Affecting parameters due to solid-liquid mixture in pipe line
Mr. Neeraj Gupta 22nd Sep 2018 Waster to energy 
Mr. Ashutosh Yadav 22nd Sep 2018 Unconventional I.C. Engine
Mr. Vishwas Grover  25th Aug 2018 Magnetorhelogical Finishing 
Ms. Namrata Gupta   25th Aug 2018       Friction Stir Processing 
Mr. Shitanshu Arya   25th Aug 2018       Paper battery
Mr. Nirmal Garg  25th Aug 2018 Hydrodynamic Journal Bearing
Mr. Rajat Goel  25th Aug 2018 Self Inflatign Tyres
Dr. Aviral Mishra  25th Aug 2018  Magnetic Abrasive Finishing
Ms. Sunita Tiwari  25th Aug 2018 Classical & Advanced Techniques for             Optimization

 

 

 

 

Session (2017-2018) Even Semester

FACULTY NAME

DATE

TOPIC OF SEMINAR

Mr. Amit K Tripathi   31st Mar 2018        Bio Materials
Mr. Shubham Choudhary   31st Mar 2018 Tribology
Mr. Dilip Kumar   31st Mar 2018 Turbulence Model
Mr. Neelesh K Sharma   31st Mar 2018 Bio Mechanics
Mr. Bhartendu M Tripathi 31st Mar 201 Nuclear Battery
Mr. Ashutosh Yadav 10th Mar 2018 CRDI Engine
Mr. Nirmal Garg 10th Mar 2018 Cooling in Electronic Device
Mr. Rajat Goel 10th Mar 2018 E-commerce: Your new shop
Mr. Mayank Kumar Tiwari 10th Mar 2018 Climate Change
Dr. Dinesh Kumar 10th Feb 2018 Non Conventional Energy Resources 
Dr. Kamal K Mittal 10th Feb 2018

Optimal sequencing of operations in manufacturing system

Ms. Pallavi Pant 

10th Feb 2018 Nano Materials
Ms. Akriti Gupta 10th Feb 2018 Virtual Lab
Ms. Ankita Maheshwari 10th Feb 2018 Artificial intelligence
Mr. Shitanshu Arya 10th Feb 2018 Paper battery

 

Dr. Umesh K. Vishwakarma 

27th Jan 2018

Non Conventional Energy Resources 

Dr. Suman Gothwa

27th Jan 2018

Optimization of AGVs Path Layout

Dr. Anuj Kumar 

27th Jan 2018

Design of Small Hydro Turbine

Session (2017-2018) Odd Semester

FACULTY NAME

DATE

TOPIC OF SEMINAR

Mr. Pradeep Jain

11.11.2017

Latest Development in 3D Printing

Mr. Pallab Biswas

11.11.2017

Measuring Re-configurability in Supply Chain –     An Overview

Mr. H.S. Chaurasiya

11.11.2017

 Non-Destructive Testing & its application

Mr.  Mr. Narendra Kumar

28.10.2017

Maintainability

Mr. V.K. Pansari

28.10.2017

Human conduct & guidelines for professional

MrMr. A.K. Dubey

28.10.2017

Osmotic power generation

Dr. Umesh Vishwakarma

28.10.2017

Non conventional machining processes

Dr. Suman Gothwal

28.10.2017

Performance measure model for FMS

Mr. Jitendra Yadav

14.10.2017

Total Quality Management   

Mr. Gaurav Tripathi

14.10.2017

Types of Composites   

Mr. Gajesh Kumar

14.10.2017

Green Engine-III   

Mr. Mayank Agrawal

14.10.2017

Materials For future   

Mr. Ankur Tyag

14.10.2017

Next Generation Vehicle     

Mr.  Amit K. Tripathi

14.10.2017

Introduction to Human Values     

Mr.  Shubham Chaudhary

14.10.2017

Introduction to tribology

Mr. Vishal Agrawal

14.10.2017

SOM

Mr. Dilip kumar

09.09.2017

K-W Model in turbulence

Mr. Neelesh Kumar sharma

09.09.2017

Solar eclipse

Mr. Neeraj gupta

09.09.2017

Technical analysis of stock market

Mr. Ashutosh Yadav

09.09.2017

CRDI Engine

Mr. Rajat Goel

09.09.2017

“SOAP” a fuel for future automobile

Dr. Dinesh Kumar

12.08.2017

Functionally graded materials: An overview

Dr. Kamal K. Mittal

12.08.2017

Part family fraction of manufacturing system

Ms. Sonam Tiwari

12.08.2017

Removal of Recent layer generated by WEDM

Ms. Pallavi Pant

12.08.2017

Nano Materials 

Ms. Akriti Gupta

12.08.2017

Aerospace Nozzles 

Ms. Ankita Maheshwari

12.08.2017

Silent sound technology 

Mr. Bhartendu M. Tripathi

26.08.2017

Solar wind hybrid  

Mr. Nirmal Garg

26.08.2017

Fatique testing  

Mr. Mayank K. Tiwari

26.08.2017

Power sector in India  

Mr. Shitanshu Arya

26.08.2017

Paper battery  

 

 

Session (2016-2017) Even Semester

FACULTY NAME

DATE

TOPIC OF SEMINAR

Mr. Kamal Kr. Mittal

28 Jan 2017

Lean Philosophy

Ms. Sonam Tiwari

28 Jan 2017

Wire electric discharge machining(WEDM)

Dr. Preeti Joshi

28 Jan 2017

Nano-composites

Ms. Ankita Maheshwari

10 Feb 2017

Tri-generation system / CCHP

Ms. Akriti Gupta

 

10 Feb 2017

Latest Trends in Product Development

 

Ms. Pallavi Pant

10 Feb 2017

Advance Joining Process

Mr. Rajat Goel

25 Feb 2017

Incineration plants

Mr. Mayank Kr. Tiwari

25 Feb 2017

Micro fluids & life

Mr. Nirmal Garg

25 Feb 2017

Active magnetic bearings

Mr. Shitanshu Arya

25 Feb 2017

Paper battery

 

Mr. Neelesh K. Sharma

11 Mar 2017

Sintering

Mr. Neeraj Gupta

11 Mar 2017

Technical Analysis of Stock Markets

Mr. Bhartendu M. Tripathi

11 Mar 2017

Li-s Battery

Mr. Ashutosh Yadav

11 Mar 2017

Utilization of heat from exhaust and jacket water of IC Engine

Session (2016-2017) OddSemester

FACULTY NAME

DATE

TOPIC OF SEMINAR

Mr. Neeraj Gupta

24 Sep 2016

Introduction to stock markets and trading

Mr. Neelesh Kr. Sharma

24 Sep 2016

Lab View

Mr. Dilip Kumar

24 Sep 2016

Slurry pipeline

Mr. Vishal Agrawal

24 Sep 2016

Vactrains

Mr. Shubham Choudhary

15 Oct 2016

Damped Vibration

Mr. Mayank Agrawal

15 Oct 2016

Composite Manufacturing Method

Mr. Amit K. Tripathi

22 Oct 2016

TBC Coating

Mr. Ankur Tyagi

28 Oct 2016

Parallel Universe

Mr. Gaurav Tripathi

28 Oct 2016

Gravitational Waves: Listening to universe

Mr. Jitendra Yadav

28 Oct 2016

Light Pollution

Mr. H.S. Chaursiya

28 Oct 2016

Close Ecological System

Mr. Gajesh Kumar

04 Nov 2016

‘Kaizen’ & value stream mapping

Mr. Vivek K. Pansari

12 Nov 2016

Human Values

Mr. Narendra Kumar

12 Nov 2016

Total Quality Management

Mr. Pallab Biswas

12 Nov 2016

Economic Sustainability and re-configurability in supply chain

Mr. Pradeep Jain

12 Nov 2016

3-D Printer

Prof I P Sharma

26 Nov 2016

Management by Measurement

Mr. R.K. Singh

26 Nov 2016

Smart Villages

Mr. A.K. Dubey

26 Nov 2016

Ocean Electricity

Prof G P Dube

26 Nov 2016

Central force motion and its application to spare mechanics

Mr. Devendra Singh

02 Dec 2016

Manufacturing of Tyres – 3

Dr. Dinesh Kumar

02 Dec 2016

System Dynamic Modeling of supply chain

 

FACULTY NAME

DATE

TOPIC OF SEMINAR

Mr. Vijay K. Dalla

13th Aug 2016

Surgical Robot     

Mr. Suyash Varshney    

13th Aug 2016

Static and Dynamic Mechanical Analysis of Carbon - Carbon Composite filled with human hair derive carbon

Ms. Akriti Gupta    

13th Aug 2016

Smart & intelligent material

Ms. Pallavi Pant    

13th Aug 2016

Hybrid Welding    

Mr. Rajat Goel    

27th Aug 2016

Magnetic Refrigeration     

Mr. Mayank K. Tiwari    

27th Aug 2016

Micro Fluidity      

Mr. Shitanshu Arya    

27th Aug 2016

Study on Nano-particles       

Ms. Ankita Maheshwari    

27th Aug 2016

Big Data       

Ms. Neha Agrawal    

10th Sep 2016

Cryogenic Technology & its application

Mr. Ashutosh Yadav   

10th Sep 2016

Exhaust Emissions and it control for I.C. Engine  

Mr. Bhartendu Mani Tripathi     

10th Sep 2016

Li-Air Battery     

Mr. Nirmal Garg     

10th Sep 2016

Water Desalination through Cogeneration System      


Session (2015-2016) Even Semester

FACULTY NAME

DATE

TOPIC OF SEMINAR

Mr. R.K. Singh    

7th May 2016

Drought

Mr. Devendra Singh    

7th May 2016

Manufacturing of tyre     

Mr. Vishal Agrawal  

20 Feb 2016

Mars Orbiter Mission by ISRO

Mr. Jitendra Yadav    

16th Apr 2016

Hybrid Car

Mr. H.S. Chaurasiya    

16th Apr 2016

Light Pollution

Mr. A.K. Dubey    

16th Apr 2016

Freeze Drying

Mr. Gaurav Tripathi    

02-Apr-16

Un-conventional machining processes

Mr. Gajesh Kumar    

02-Apr-16

Green engine

Mr. Nirmal Garg    

02-Apr-16

Thermoelectric cooling

Mr. Dilip Kumar  

19-Mar-16

Study of Erosion Wear

Mr. Shubham Chaudhary    

19-Mar-16

Nuclear Power Plant

Mr. Amit Kr. Tripathi    

19-Mar-16

Thermal Barrier Coating

Mr. Rajat Goel    

19-Mar-16

Tidal Power Plant 

Mr. Ankur Tyagi    

19-Mar-16

Computer Integrated Manufacturing

Mr. Mayank Agrawal    

19-Mar-16

Composites

Mr. Neelesh Kr. Sharma   

20-Feb-16

Vibration

Mr. Ashutosh Yadav   

20-Feb-16

Hydraulic Pump

Mr. Bhartendu Mani Tripathi   

06-Feb-16

Brief Introduction to Nano Technology

Mr. Neeraj Gupta   

06-Feb-16

Reverse Logistics

Mrs. Neha Agrawal   

06-Feb-16

Automated Guided Vehicles

 

Session (2015-2016) ODD Semester

FACULTY NAME

DATE

TOPIC OF SEMINAR

Prof. I.P. Sharma (HoD)

21 Nov 2015

Entrepreneurship & Skill Development

Dr. G.P. Dubey

21 Nov 2015

Stress Analysis using Tensors

Mr. R.K.Singh

21 Nov 2015

Smart Cities

Mr. Devendra Singh

21 Nov 2015

Hydraulics and Pneumatics

Mr. Pradeep Jain

7 Nov 2015

Thermal Engineering

Mr. Pallab Biswas

7 Nov 2015

Delphi Method

Mr. Narender Kumar

7 Nov 2015

Heat Treatment of Steel

Mr. Vivek Kr. Pansari

7 Nov 2015

Lean Six Sigma

Mr. Ajay Kant Dubey

31 Oct 2015

Biomass Fuel

Mr. H.S.Chaurasiya

31 Oct 2015

Thermal Engineering

Mr. Jitendra Yadav

31 Oct 2015

Thermal Engineering

Mr. Gaurav tripathi

31 Oct 2015

Mr. Gaurav Tripathi

Mr. Gajesh Kumar

17 Oct 2015

Green Engine Technology

Mr. Raja Ram

17 Oct 2015

Steam Nozzle

Mr. Rakesh V. Mishra

17 Oct 2015

Seven Tools of TQM

Mr. Mayank Agrawal

17 Oct 2015

Composites

Mr. Ashutosh Yadav

09 Oct 2015

CI Engines

Mr.Neeraj Gupta

09 Oct 2015

Reverse Logistics

Mr. Bhartendu Mani Tripathi

09 Oct 2015

Conversion of solar energy in form of heat

Mr. Adarsh Soni

09 Oct 2015

Lathe Machine

Ms. Amrita Pandey

01 Oct 2015

Rapid Prototyping

Mr. Ankur Tyagi

01 Oct 2015

Introduction to grapheme.

Amit Kr Sharma

18th Sep 2015

Scanning Electron Microscope

Mr. Amit Kr. Tripathi

18th Sep 2015

Thermal Barrier Coating in Diesel Engine Component    

Mr. Shubham Chaudhary

4th Sep 2015

Programming Fundamentals   

Mr. Alok Mishra

4th Sep 2015

Ornithopter: The Micro Air Vehicle

Mr. Dilip Kumar

21st Aug2015

Parametric Study of Erosion Wears due to Slurry in Rotating Wear Test Rig

Mr. Neelesh Kr. Sharma

21st Aug 2015

A brief Introduction about Automobile Ignition System   

Mr. Chandrakant Gangwar

21st Aug2015

Study of Different Parameters During Fire in a Room

Mr. Vishal Agrawal

28th Aug2015

Introduction of Solar Parabolic Trough.

 

Session (2014-2015) EVEN Semester

FACULTY NAME

DATE

TOPIC OF SEMINAR

Prof. I.P. Sharma (HoD)

30.05.2015

NBA Accreditation

Dr. G.P. Dubey

30.05.2015

Mechanics of a Boomerang

Mr. R.K.Singh

16.05.2015

Introduction to optimization  

Mr. Devendra Singh

02.05.2015

Hydraulic Controls 

Mr. Pradeep Jain

02.05.2015

Advancement in Rapid Prototyping

Mr. Pallab Biswas

14.03.2015

ISM Interpretive Structural Modeling 

Mr. Narender Kumar

16.05.2015

Casted by Gated Pattern

Mr. Vivek Kr. Pansari

16.05.2015

Human Values - Understanding Relationship

Mr. Ajay Kant Dubey

21.03.2015

Ocean Thermal Energy Conversion

Mr. H.S.Chaurasiya

14.03.2015

Science Fiction, Paranormal and Religion

Mr. R.K. Maurya

04.04.2015

Computed Tomography 

Mr. Jitendra Yadav

14.03.2015

Maintaining Good Health

Mr. Gaurav tripathi

21.03.2015

Discovery of God particles

Mr. Amit sharma

14.03.2015

Global Warming

Mr. Gajesh Kumar

14.03.2015

Ergonomics in Display Design

Mr. Raja Ram

04.04.2015

Boilers 

Mr. Rakesh V. Mishra

02.05.2015

Quality Circle in TQM  

Mr. Mayank Agrawal

16.05.2015

Composite Manufacturing processes   

Mr. Yogendra Dwivedi

04.04.2015

Recent Trends in IC Engine 

Ms. Amrita Pandey

21.03.2015

CNC Programming

Mr. Ankur Tyagi

07.02.2015

Micro Abrasive Water Jet Machining

Mr. Tapan Dey

21.02.2015

CFD Analysis of LPT

Mr. Amit Kumar Sharma

07.02.2015

Magneto Hydro Dynamic

Mr. Subodh Kumar

21.02.2015

Solar Energy

Session (2014-2015) ODD Semester

FACULTY NAME

DATE

TOPIC OF SEMINAR

Prof. I.P. Sharma (HoD)

29.11.2014

Vision, Mission & Objectives

Prof. J.P. Malhotra

30.08.2014

Air Flow bench

Prof. M.K.Muju

15.11.2014

Lab up-gradation

Dr. G.P. Dubey

15.11.2014

Beams & trusses

Mr. R.K.Singh

30.08.14

In search of happiness

Mr. Devendra Singh

06.09.14

Manufacturing of Tyres Session II

Mr. Pradeep Jain

20.09.14

Selective Laser Sintering

Mr. Pallab Biswas

18.10.2014

 

Agility index in supply chain- An overview

Mr. Narender Kumar

11.10.14

Casting with match plate pattern

Mr. Vivek Kr. Pansari

1.11.2014

Lean Six Sigma

Mr. Ajay Kant Dubey

15.11.2014

Air Pollution

Mr. H.S.Chaurasiya

18.10.2014

Electronic waste management

Ms. Neha Agrawal

1.11.2014

Earthquake proof building

Mr. R.K. Maurya

20.09.14

Robots End Effectors

Mr. Jitendra Yadav

30.08.2014

Vibration

Mr. Rajiv Kumar

6.09.2014

Advance welding

Mr. Gaurav tripathi

11.10.14

Stainless steel

 

Mr. Amit sharma

18.10.2014

IC Engines

Mr. Gajesh Kumar

1.11.2014

Green manufacturing

Mr. Raja Ram

20.09.14

Lithium ion cell performance using single

Particle representation of battery electrode

Mr. Rakesh V. Mishra

06.09.14

Sustainable Energy

Ms Apeksha

25.08.2014

 

FEM

Mr. Mayank Agrawal

30.08.14

Introduction to Bio-composites

Mr. Varun Pathak

16.08.14

Biodiesel & Bio-lubricant

Mr. Bipin Kishor

16.08.14

Reduction behavior of ilmenite by carbon

Mr. Yogendra Kr. Dwivedi

16.08.14

Multi-response optimization in dry Turning

process using Taguchi method and  utility

concept

Ms. Amrita Pandey

02.08.14

Application of Taguchi and Fuzzy logic in turning process

Mr. Daya Shanker Yadav

30.08.14

CBN Grinding

Mr. Ashish Mishra

02.08.14

Trimodated Nanocomposite

Mr. Parveen Kumar

02.08.14

Diesel Particulate Filter (DPF)

Session (2013-2014)

Date

Faculty Name

Topic of seminar

14.06.2014

Prof. I.P. Sharma (HoD)

NLP (Neuro Linguistic Programming)

03.05.2014

Prof. J.P. Malhotra

Determination of Adiabatic Temperature in Gas Turbines

01.03.2014

Prof. M.K.Muju

Dawn of the age of Robots

7.02.2014

Dr. G.P. Dubey

Mechanics of a Boomerang

15.03.2014

Mr. R.K.Singh

Carbon Credits - An Introduction

29.03.2014

Mr. Devendra Singh

Tyre Manufacturing - II

25.04.2014

Mr. Pradeep Jain

Emerging Trends in Rapid Prototyping

15.02.2014

Mr. Pallab Biswas

Green Manufacturing

11.04.2014

Mr. Narender Kumar

Heat Treatment of Steel

03.05.2014

Mr. Vivek Kr. Pansari

Evolution of Product - Safety Razor

16.05.2014

Mr. Ajay Kant Dubey

Cryogenic Grinding

19.04.2014

Mr. H.S.Chaurasiya

Climate Change

10.05.2014

Ms. Neha Agrawal

Balancing Robots

19.04.2014

Mr. R.K. Maurya

Automation of Cooling System in Machine Tool

24.05.2014

Mr. Jitendra Yadav

Water Pollution

03.05.2014

Mr. Amit Kr. Gupta

Friction Stir Processing

21.02.2014

Mr. Rajeev Kumar

Design Evolution of Bicycle

24.05.2014

Mr. P. Pul Singh

Siemens PLM - An Overview

29.03.2014

Mr. Gaurav Tripathi

Nano Fluids

15.02.2014

Mr. Amit Sharma

Solar Energey Storage using Phase Change Materials

01.03.2014

Mr. Gajesh Kumar

Ergonomics Design of Display and Control

15.03.2014

Mr. Raja Ram

TPM - Principles and Concepts

07.03.2014

Mr. Rakesh V Mishra

An Ergonomic Approach on human visual  search performance with respect to  illumination, noise and colour combination.

19.04.2015

Ms. Apeksha Ranjan

Air Powered Vehicles

19.10.13

Mr. Vivek Kr. Pansari

Human Values - Harmony in Society

19.10.13

Mr. Ajay Kant Dubey

Geothermal Energy

05.10.13

Mr. Narender Kumar

Quality of Inspected Components

05.10.13

Mr. Jitendra Yadav

Four Wheel Steering

21.09.13

Mr. Pallab Biswas

Enabling high quality teaching and learning for large classes

21.09.13

Ms. Saumya

Hydrogen Storage

07.09.13

Mr. Amit sharma

Biodiesel from Oilgae, Biofixation of CO2 by Microalgae - A Solution to Pollution Problems

07.09.13

Mr. Gajesh Kumar

Poka-Yoke

31.08.13

Mr. Laxmikant Yadav

Evacuated Tube Solar AirCollector

31.08.13

Mr. P. Pul Singh

Analysis of Low Frequency Vibrations on Sedentary Activity using DOE

31.08.13

Mr. Gaurav tripathi

Utilization of Flyash for Producing Ceramics

31.08.13

Mr. Raja Ram

Business Process Reengineering

23.08.13

Mr. Ashish Sharma

Knocking in IC Engines

23.08.13

Mr. Rajeev Kumar

Introduction to Smoke Detectors

17.08.13

Mr. R.K. Maurya

Cryogenic Engines

17.08.13

Mr. Amit Kr. Gupta

Modeling MRR in WEDM using RSM

07.08.13

Ms. Namrata Gupta

Rapid Prototyping

Session (2012-2013)

Date

Faculty Name

Topic of seminar

18.08.12

R.K. Singh

Equipment Reliability

18.08.12

Gajendra Singh

Impact on Indian Economy & Culture of Globalization

01.09.12

Devendra Singh

Composite Materials

01.09.12

Kamal Kr. Mittal

Lean Manufacturing

01.09.12

Rajiv Kumar

Ergonomics at the work place

15.09.12

Ashish Sharma

Principal Component Analysis

15.09.12

Namrata Gupta

Shot Peening

29.09.12

Pradeep Jain

Artificial Intelligence & Expert System

29.09.12

Mohneesh Sharma

Social Networking Sites

29.09.12

Amit Kr. Gupta

5-S (for continues improvement)

06.10.12

Narendra Kumar

Effect of sand grain, shape & size on castings

06.10.12

Vivek Kr. Pansari

Human Values (Role of education)

06.10.12

Neeraj Verma

Safe maintenance & repair activities

20.10.12

Pallab Biswas

Value Engineering in Flash Light Torch

20.10.13

Jitendra Yadav

Safe Vehicle Operation

03.11.12

Neha Agrawal

Genetic Algorithm

03.11.12

R.K. Maurya

Cryogenic Rocket Engine

03.11.12

A.K. Dubey

Thermo Acoustic Refrigeration

02 Feb. 2013

Mr. Amit Gupta

Advanced Machining Processes

02 Feb. 2013

Mr. Laxmikant Yadav

Desiccant cooling system

02 Feb. 2013

Mr. H S Chaurasiya

Causes of failure in power pack for dream liners

02 Feb. 2013

Mr. Ashish Sharma

Principle Component Analysis

08 Feb. 2013

Ms. Namrata Gupta

Application of DoE in laser beam welding

08 Feb. 2013

Mr. P. Pul Singh

A futuristic model for activity comfort using ANN

16 Feb. 2013

Mr. Rajiv Kumar

Secret Behind FOSS

16 Feb. 2013

Mr. Gajendra Singh

Introduction to Graphics

22 Feb. 2013

Mr. Narendra Kumar

Heat affected zone

22 Feb. 2013

Mr. Neeraj Verma

Maintenance strategies for electrical equipment in           wire mill

2nd March 2013

Ms. Neha Agrawal

Analytical Hierarchy Process

2nd March 2013

Mr. R.K. Maurya

Jatropha, the future of bio fuel

8th March 2013

Mr. Ajay Pratap Singh

Turbulent separating flow over hump in a channel

8th March 2013

Mr. Ajay Kant Dubey

Variable compression ratio engine

16th March 2013

Mr. Jitendra Yadav

Air Pollution

23rd Mar 2013

Mr. Pradeep Jain

Finite Element Method

23rd Mar 2013

Mr. Vivek Pansari

Human Values - Understanding Relationship

23rd Mar 2013

Mr. Pallab Biswas

Active Learning in Engineering Education

06 Apr 2013

Prof B B Prasad

Historical Developments in Strength of Materials

12 Apr 2013

Prof I P S Paul

Latest Trends in Power Generation

 

Guest Lectures

(Even sem 2020-21)

Date Topic Speaker
07 July 2021 Fabrication of Laminated Polymer Matrix Composites Dr. Pramendra Kumar Bajpai, NSUT, New Delhi

(Odd sem 2020-21)

Date Topic Speaker
31 December 2020 Manufacturing at micro and nanoscale – Approaches and experiments Dr. Arjyajyoti Goswami,
Assistant Professor, NIT Durgapur
8 January 2021 ITER Projects and Cryogenic Aspects in Fusion Energy Mr. Vinit Shukla, Scientific Officer, ITER-India, IPR, Department of Atomic Energy, Govt. of India

(Even sem 2019-20)

Date Topic Speaker
31 January 2020 Multi-pressure Vapour Compression System and Environmental Impact Assessment Prof (Dr) Praveen Pandey Director and Professor of Mechanical Engineering, KIPM-College of Engineering & Technology, GIDA, Gorakhpur
13 February 2020 Industry Readiness for Graduate Engineer Mr. Arun Prakash Bhattacharjee  GM, Quality for DG and Panel Division, Sterling Generators
25 Febr 2020 DECLUTTER Gp Capt Ashok K Chordia (Retd), IAF

(Even sem 2018-19)

Date Topic Speaker
29 January 2019 Combustion Systems & Role of Hydrogen in Emission Control Prof. Praveen Kumar Pandey

Director/Principal, Echelon Institute of Technology, Faridabad

27 February 2019 Metrology: Does it really required Dr. Harish Kumar

Head, Mechanical Engineering, National Institute of Technology, Delhi

(Odd sem 2018-19)

Date Topic Speaker
22 August 2019 Fibre Reinforced Composite Dr. Pramendra Kumar Bajpai

Assistant Professor, Division of Manufacturing Processes and Automation, Netaji Subhas University of Technology, Dwarka, New Delhi

12 September 2019 Thermal Power Plant – New Challenges Mr. Alok Kumar Srivastava

Senior Manager, NTPC

(Ex. Scientist ISRO)

27 September 2019 Artificial Intelligence Dr. Umang Soni

NSUT, Delhi

Date

Topic

Speaker

29th Jan.2019 Combustion system and role of Hydrogen in emission control  Prof. Praveen kumar Panday.

20th Sep 2018

 Advanced Manufacturing and Nano Technology Dr. Xizhang Chen, Professor, Wenzhou University, China and Dr. Sergey Konovalov, Professor and Head of the Department of Metals Technology and Aviation Materials

24th Aug 2018

 Power Plant Familiarization Mr. Ashutosh Kumar Srivastava, Deputy General Manager (O&M), NTPC

31st Jul. 2018 

 Advances in Thermal Engineering

Dr.  Lajpat Rai, Ex. Prof., IIT Delhi.

  21 Mar 2018  Environmental Concerns & Industrial     Control Strategies Dr.  C.L. Verma, Ex. Director (Grade Scientist), CSIR, CBRI, Roorkee

02 Feb 2018

Thermal Power Plant - An overview & challenges

Mr. Alok Kumar Srivastava, Senior Manager, NTPC & Ex Scientist, ISRO

13 Nov 2017

Environmental Concern and Industrial Control Strategies

Dr. C.L. Verma, Ex. Director (Grade Scientist), CSIR, CBRI, Roorkee

8 Nov 2017

Hybrid and Electric Vehicle

Mr. Ramesh Rana, General Manager, M/s. Sterling Generators

1 Sep 2017

Mechanical Engineering Skills in Current Industries

Mr. Ramesh Rana, General Manager, M/s. Sterling Generators

9 Aug 2017

Role of Hydrogen in Soot Abatement in Diffusion Combustion

Prof. Praveen Pandey, Director/Principal, Echelon Institute of Technology, Faridabad

21 Apr 2017

Demand and Futuristic Plan of Thermal Energy in India

Mr. Alok Kumar Srivastava, Senior Manager, NTPC & Ex-Scientist, ISRO

29 Mar 2017

Application of FEA in Engineering Mechanics

Mr. Arun Kumar Singh, Lead Engineer, Mechanical Integrity, Steam Turbine Engineering, GE Power India Ltd.

2 Feb 2017

Mass Metrology Standards

Mr. Harish Kumar, Scientist, Mass Metrology, NPL(CSIR), New Delhi

21 Sep 2016

Thermal Power Plant-An Overview & Challenges

Mr. Alok Kumar Srivastava, Senior Manager, NTPC & Ex-Scientist, ISRO

12 Aug 2016

Six Sigma

Mr. Abhay Singh, Head, Reliability & Quality, Deeya Energy, Gurgaon

13 Apr 2016

Smart Materials

Prof. Jitender Bhaskar, Mechanical Engineering Department, HBTI, Kanpur

28 Oct 2015

Entrepreneurship

Mr. Sudhir Mohan Mittal,Managing Director, “Sukriti Vidyut Udhyog, Ghaziabad”

10 Sep 2015

Welding Automation

Mr. Chellappan Raghavan,Head, Marketing & Training,Fronius India Pvt. Ltd., Pune

02 Sep 2015

Failure Mode and Effect Analysis

Mr. V. Koteswara Rao,Vice President,R & D in Majestic Auto Limited

09 Apr 2015

Graph theory based modeling

Dr. O.P. Gandhi, Professor and Head, ITMMEC at Indian Institute of Technology, Delhi

19 Sep 2014

Flow Batteries

Mr. Abhay Singh, Head, Reliability & Quality, Deeya Energy, Gurgaon

12 Mar 2014

HOW TO ACE A JOB INTERVIEW

Wg Cdr (Retd.) G.S. Nehra, Soft skill trainer/Motivational speaker in Sharda University, Greater Noida

08 Apr 2013

Super Critical Steam Turbine & Power Plants

Dr. Lajpat Rai Taneja, Ex. Prof., Deptt. of ME, IIT Delhi

21 Mar 2013

FORECASTNG OF ELECTRICITY DEMAND OF INDIA

Shri Major Singh, Chief Engineer, Energy Planning Central Electricity Authority, New Delhi

04 Feb. 2013

GLOBAL & INDIAN POWER SECTOR OVERVIEW AND CAREER PROSPECTS IN POWER SECTOR

Shri S.K. Choudhary, Director, NPTI, Faridabad

20 Nov. 2012

Renewable Energy and Distributed Generations

Dr P N Hrisheekesha , Director, IPEC, Ghaziabad

24 Aug. 2012

Heat Transfer Through Extended Surfaces

Dr. Praveen Pandey, Professor, MMMEC, Gorakhpur

Books Published

Title Author(s) Publisher Year
Composite Fabrication on Age-hardened Alloys Using Friction Stir Processing Namrata Gangil, Arshad Noor Siddiquee, Sachin Maheshwari CRC Press, Taylors & Francis December 2020
Engineering Graphics & Design Mr Pradeep Jain Khanna Publishing 2019-20
Engineering Auto-CADD Mr Pradeep Jain Khanna Publishing 2014-15

A team of faculty members from ME Deptt. designed and developed a containerized foldable and transportable solar panel generator sponsored by M/s. Jakson Engineers Pvt. Ltd., Greater Noida. The project commenced in June 2016 and was completed in Sep 2016.

Students Activity

(a) The event and topic wise details of AKGEC, ME students who participated in the CII Skill-Will-Lead Programme organized in Even Sem 2018-19 are as follows.

DATE & VENUE TOPIC UNIVERSITY ROLL NO NAME YEAR POSITION & AWARD AMOUNT
04 APR 2019 (KIET) GRINDING MACHINES: TYPES, OPERATIONS, PARTS, TOOLS 1602740169 UTKARSH DWIVEDI III SECOND                                                               15000/-
1702740064 ISSHAAN ARORA II
1702740052 FAHAAD AKHTAR II
1702740080 MAHIMA BAGHAEL II
04 APR 2019 (IMSEC) PRESENTATION SKILLS: STRUCTURE 1602740184 YASHWANT VERMA III FIRST                                                     25000/-
1602740168 UTKARSH DIXIT III
1602731133 SHIVAM SHISHODIA III
1702740008 ADITY TIWARI II
05 APR 2019 (AKGEC) QUALITY CIRCLE 1602740169 UTKARSH DWIVEDI (R-1) III FIRST                                                                                    25000/-
1702740064 ISSHAAN ARORA (R-1) II
1702740080 MAHIMA BAGHEL (R-1) II
05 APR 2019 (ABES) BULK MAGTERIAL HANDLING EQUIPMENT 1802740910 MANSI SRIVASTAVA II FIRST                                                     25000/-
1702740043 DEEPANSH VARSHNEY II
1702740025 ANSHIKA II
1702740094 NEERAJ PAL II
12 APR 2019 (SHARDA UNIV.) PULL PRODUCTION & SUPPLIER INVOLVEMENT 1702740088 MRIDUL GARG II SECOND                                                               15000/-
1602740185 YUSUF AKHTAR III
1702740101 PRAKARSH SARASWAT II
1702740008 ADITY TIWARI (R-1) II
12 APR 2019 (GLBIT) LOW COST AUTOMATION 1602740169 UTKARSH DWIVEDI (R-2) III NIL
1602740157 SMITA III
1702740053 FARAZ ASAD II
1702740029 ASHUTOSH YADAV II

(b) Mr. Naman Agarwal & Mr. Animesh Dayal ME-4th Year gave an impressive performance in IISF-2019 and secured AIR 1st rank in “Student Engineering Model Competition” Category. They receive cash award of Rs 11,000/- with Certificates and Trophy. They submitted their idea named “Water Efficient Pneumatic Flushing System” in the theme “Swachha Bharat (Environment, Pollution treatment”..

Professional society activities, events, conferences organized etc.

AUKERA 2019
Society : ISTE AKGEC STUDENTCHAPTER
Date of Event : 11th & 12th Feb 2019
Organizing Institute : AKGEC
SAEINDIA
INNOVACION 2019
Society : SAEINDIA Collegiate Club
Date of Event : 2nd & 3rd Feb 2019
Organizing Institute : AKGEC
Collegiate
INNOVACION 2018
Society : SAEINDIA Collegiate Club
Date of Event : 3rd & 4th Feb 2018
Organizing Institute : AKGEC
AACAR
AACAR 5.0
Society : SAEINDIA Collegiate Club
Date of Event : 17th and 18th Feb 2018
Organizing Institute : AKGEC
MINDS
INNOVATIVE MINDS- 2018
Society : Indian Society for Technical Education
Date of Event : 10th March 2018
Organizing Institute : AKGEC
TECHNOVATION
TECHNOVATION-2017
Society : Indian Society for Technical Education (ISTE)
Date of Event : 8th April, 2017
Organizing Institute : AKGEC

1.ACADEMIC MERIT AWARD – UNIVERSITY POSITION HOLDER

  

NAME OF STUDENT

B.TECH BRANCH

PASSOUT YEAR

POSITION

Ajay Singh

Mechanical Engineering

2010-14

I

Saurabh Vats

Mechanical Engineering

2010-14

II

Satyam Shukla

Mechanical Engineering

2007-11

I

Vinit Kumar Shukla

Mechanical Engineering

2007-11

II

Kumar Shubham

Mechanical Engineering

2000-04

I

Amit Srivastav

Mechanical Engineering

1999-03

I

Harish Kumar Kansal

Mechanical Engineering

1998-02

I

Amit Goyal

Mechanical Engineering

1998-02

III

 

 

 

2.  STUDENT ACHIEVEMENTS IN ACADEMIC ACTIVITIES

Photo

Name

Branch/Passout Year

Organization

Harshit Agarwal

ME/2014

He got all India 2nd rank in GATE 2014 exam. He also got 15th position in UPTU (ME Branch) in 2014 passout batch. He is presently working in IOCL.

Chahat Sharma

ME/ 2012

Selected in IES (Indian Engineering Services). Presently working in IOCL.

Aniket

ME/ 2012

Selected in IES (Indian Engineering Services). Presently working in NTPC.

Pavnesh Singh

ME / 2012

Assistant Commandant, ITB Police, New Delhi

Parigyan Singh

ME/ 2011

Selected in IES (Indian Engineering Services. Presently working in BHEL

 

 

 

 

3.           Outstanding performance in GATE

 

Name

Branch

Passout Batch

GATE Rank

Shivam Gupta

Mechanical Engineering

2013-17

19

Akash Yadav

Mechanical Engineering

2013-17

132

Arpit Verma

Mechanical Engineering

2013-17

 341

Prafful Verma

Mechanical Engineering

2013-17

 512

Bharat Sikka

Mechanical Engineering

2012-16

190

Mayur Sahu

Mechanical Engineering

2012-16

209

Akshay Kumar

Mechanical Engineering

2011-15

326

Deepak Kumar

Mechanical Engineering

2011-15

318

 

  

4.          M.Tech. from IITs/IISc/NITs/Reputed Govt. Colleges

Name of Student

B.Tech. Branch

Passout

Batch

Name of Institution

M.Tech.

Batch

Shivam Gupta

Mechanical Engineering

2013-17

IISc, Bangalore

2017-19

Shalini Singh

Mechanical Engineering

2013-17

IIT, Indore

2017-19

Shivam Gupta

Mechanical Engineering

2013-17

IIT, Madras

2017-19

Joita Chakraborty

Mechanical Engineering

2013-17

Indian Institute of Space Science and Technology

2017-19

Manjari

Mechanical Engineering

2013-17

Motilal Nehru National Institute of Technology, Allahabad

2017-19

Bharat Sikka

Mechanical Engineering

2012-16

IIT-Kanpur

2016-18

Shivkant Verma

Mechanical Engineering

2010-14

IIT - Roorkee

2016-18

 

 

 

5.          Outstanding performance in CAT

Name

Branch

Passout Batch

CAT %TILE

Bharat Tripathi

Mechanical Engineering

2012-16

98.27

Paritosh Srivastava

Mechanical Engineering

2013-17

97.07

Yasho Vardhan Khemka

Mechanical Engineering

2013-17

91.15

Ankit Asthana

Mechanical Engineering

2012-16

92.2

 

 

6.          MBA from IIMs/ISB/Reputed Govt. Colleges (Top 20 Colleges)

Name of Student

B.Tech. Branch

Passout Batch

Name of Institution

MBA Batch

Paritosh Srivastava

Mechanical Engineering

2013-17

XLRI,  Jamshedpur

2017-19

Yasho Vardhan Khemka

Mechanical Engineering

2013-17

IMT, Ghaziabad

2017-19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7.     Students in Defence Services

 

 Name of Student

B.Tech. Branch

Passout Batch

Organisation

Utkarsh Srivastava

ME

2012-16

Indian Army

Vikalp Sharma

ME

2009-13

Indian Air Force

Akshita Singh

ME

2009-13

Indian Navy

Sunny Singhal

ME

2008-12

Indian Army

Swati Shukla

ME

2008-12

Indian Air Force

INDUSTRIAL VISIT

An industrial visit for the students of B.Tech (ME) 2nd year was organized on 4th & 5th Feb 2019. The visit was conducted in four groups of 45 students each. Two groups went on 4th Feb and remaining two groups on 5th Feb 2019. Each group was accompanied by two faculty members in the visit. The purpose of industrial visit was to make the students aware about the industrial working culture as well as practical exposure related to the real time engineering.

Mr. Dev Sharma, Plant Head & Mr. Jai Srivastava, HR Executive welcomed the group of students and accompanied faculty members. Mr. Dev Sharma explained the organization and the working of the industry and took the group for the tour to the industry. He also apprised the students about the enterepreneurship and the challenges likely to be faced in starting of any new company.

The students and accompanying faculty members were happy and found that the visit was very informative and enhancing technical knowledge.

PIEZO ENERGY TILES:

While the Nation is facing a great challenge to meet the requirement of electric power in various spheres of daily life due to multiplying growth of population, the students of Ajay Kumar Garg Engineering College Ghaziabad have found the solution of growing teathing problem of electric power generation. The innovative idea conceptualized by these young engineers utilizes each step of growing population for generation of electric power. The growing population which was considered a cause for depletion will soon become a source of generation to meet the growing demand of electric power.

The students of B.Tech (Mechanical) of AKGEC have conceptualized, designed and fabricated an “Energy Tile” which produces electric power with each step on it. The “Energy Tile” has been functionally tested for its purpose and also demonstrated at Metro Bhawan for its wide spread use at various metro stations of DMRC. The “Energy Tile” will find its use at Airports, Shopping Malls. Hospitals, Bus Stands, concerts and at any place where frequent movements of crowding population takes place. The innovative efforts by the young engineers of AKGEC are an inspiring step towards Skill India & Make in India.

The project was appreciated by Shri Mangu Singh, Managing Director, Delhi Metro Rail Corporation and Dr. P.C. Pant, Director (HRD), Ministry of New and Renewable Energy, Govt. of India. The project has also been patented by Govt. of India on the names of Mr. Nripendra Singh and Mr. Prateek Kumar Sharma, Alumni of Ajay Kumar Garg Engineering College, Ghaziabad (Year 2015 Passout Batch).

Patent Application No. : 1034/DEL/2015 A,

Patent Publication Date : 14/10/2016

GO-KART-2015 : The student members of the club have been instrumental in designing and fabrication of Go-kart by utilizing our college workshop/lab facilities, with different specifications given by various National and International organizations. During 26-30 March 2015, our SAE team participated in an International Go-kart competition organized at LPU, Jalandhar. 115 teams were shortlisted to participate in the event. Our team displayed a praiseworthy acumen and professionalism by securing a first runner up position in the competition. Our student who drove the Go-kart has been judged as the best driver. The team had earned a cash award of Rs. 60,000/- for first runner up prize and Rs. 5,000/- for best driver.

SUPRA-2015 : The SAE team had participated in SUPRA-2015 contest which was held in Chennai from 15 Jul to 19 Jul 15. For this contest, the SAE team consisting of engineering students of B.Tech (ME) 2nd, 3rd & 4th year had designed and fabricated a four wheeled formula race car by making use of manufacturing facilities available in the workshop of the college. After qualifying virtual round, total 91 teams from various states of the country were shortlisted for the final contest. The AKGEC team earned ‘Dhronacharya Award’ of Rs. 25,000/- (Cash) and a Samsung Tab (Rs. 20,000/-). This award is given to best faculty advisor among all participating teams at National level. Mr. Amit Sharma, faculty of ME Deptt. of AKGEC has been judged as “Best Faculty Advisor” and recipient of “Dhronacharya Award” during the above National event (SUPRA-2015).

E-Paper Presentation

EVEN SEM 2020-21

DATE TITLE OF THE PAPER NAME OF FACULTY
APR / MAY 2021 APPLICATION AND RESEACH ON BUILDING 3-D PRINTING MR. PRADEEP JAIN
APR / MAY 2021 ADOPTION OF INTEGRATED LEAN-GREEN-AGILE STRATEGIES FOR MODERN MANUFACTURING SYSTEMS MR. VIVEK KR. PANSARI
APR / MAY 2021 OPTIMAL DESIGN OF THE FLYWHEEL USING NATURE INSPIRED OPTIMIZATION ALGORITHMS MR. AJAY KANT DUBEY
APR / MAY 2021 WIRE AND ADDITIVE MANUFACTURING OF Ti6AL4V USING ACTIVE INTER-PASS COOLING MR. H.S.CHAURASIYA
APR / MAY 2021 FULL-SCALE FRICTION WELDING SYSTEM FOR PIPELINE STEELS-REVIEW MR. JITENDRA YADAV
APR / MAY 2021 VIABILITY OF INTERTWINED SUPPLY NETWORKS: EXTENDING THE SUPPLY CHAIN RESILIENCE ANGLES TOWARDS SURVABILITY. A POSITION PAPER MOTIVATED BY COVID-19 OUTBREAK MR. GAJESH KUMAR
APR / MAY 2021 4-D PRINTED THERMALLY ACTIVATED SELF-HEALING AND SHAPE MEMORY POLYCAPROLACTONE-BASED POLYMERS MR. ANKUR TYAGI
APR / MAY 2021 A REVIEW OF THERMAL BARRIER COATING EFFECTS ON DIESEL ENGINE PERFORMANCE AND COMPONENTS LIFETIME MR. AMIT KUMAR TRIPATHI
APR / MAY 2021 COMPUTER APPLICATION IN UNCONVENTIONAL MACHINING MR. DILIP KUMAR
APR / MAY 2021 OPPORTUNITIES AND CHALLENGES IN DEEP MINING: A BRIEF REVIEW MR. ASHUTOSH YADAV
APR / MAY 2021 THE PERFORMANCE OF SOLAR COLLECTOR CPC (COMPOUND PARABOLIC CONCENTRATOR) TYPE WITH THREE PIPES COVERED BY GLASS TUBES MR. BHARTENDU M. TRIPATHI
APR / MAY 2021 THERMOHYDRODYNAMIC ANALYSIS OF ELLIPTICAL JOURNAL BEARING WITH DIFFERENT GRADE OILS MR. NIRMAL GARG
APR / MAY 2021 A CANONICAL FRAMEWORK FOR MODELING ELASTO-VISCOPLASTICITY IN COMPLEX FLUIDS MR. MAYANK KR. TIWARI
APR / MAY 2021 PRODUCTION PLANNING WITH CELL FORMATION AND GROUP SCHEDULING FOR DYNAMIC CELLULAR MANUFACTURING SYSTEMS DR. KAMAL KR. MITTAL
APR / MAY 2021 CUTTING TOOL WEAR ESTIMATION FOR TURNING DR. UMESH K. VISHWAKARM
APR / MAY 2021 DEVELOOPMENT OF AMSTARp A MEASUREMENT TOOL TO ASSESS THE METHODOLOGICAL QUALITY OF SYSTEMATIC REVIEWS DR. SUMAN GOTHWAL
APR / MAY 2021 EXPERIMENTAL INVESTIGATION ON FATIGUE CRACK INITIATION AND PROPAGATION MECHANISM OF FRICTION STIR LAP WELDED DISSIMILAR JOINTS OF MAGNESIUM AND ALUMINUM ALLOYS DR. NAMRATA GUPTA
APR / MAY 2021 HEAT TRANSFER AND PRESSRUE DROP OF CO2 HYDRATE MIXTURE IN PIPELINE DR. VISHWAS GROVER
APR / MAY 2021 GRADED LATTICE STRUCTURES: SIMULTANEOUS ENHANCEMENT IN STIFFNESS AND ENERGY ABSORPTION DR. ALOK VARDHAN
APR / MAY 2021 HORSE DUNG AND SOIL BASED COMPOSITES FOR CONSTRUCTION OF AESTHETIC SHELVES IN RURAL HOMES OF WESTERN RAJASTHAN MR. ANSHUL KUMAR PANCHBHAIYA
MAY / JUN 2021 THE POTENTIAL OF ADDITIVE MANUFACTURING IN THE SMART FACTORY INDUSTRIAL 4.0: A REVIEW MR. PRADEEP JAIN
MAY / JUN 2021 HOW MUCH DOES LEAN MANUFACTURING NEED ENVIRONMENTAL AND INFORMATION TECHNOLGOES? MR. VIVEK KR. PANSARI
MAY / JUN 2021 ENERGY TRANSITION IN PETROLEUM RICH NATIONS: CASE STUDY OF IRAN MR. AJAY KANT DUBEY
MAY / JUN 2021 A STUDY OF COLD METAL TRANSFER CLADS IN NICKEL-BASE INCONEL 718 SUPER ALLOY MR. H.S.CHAURASIYA
MAY / JUN 2021 FRICTION STIR PROCESSING OF MAGNESIUM ALLOOYS-REVIEW MR. JITENDRA YADAV
MAY / JUN 2021 REVIEW OF QUANTITATIVE METHODS FOR SUPPLY CHAIN RESILIENCE ANALYSIS MR. GAJESH KUMAR
MAY / JUN 2021 4-D PRINTIGN BASED PIEZOELECTRIC COMPOSITE FOR MEDICAL APPLICATIONS MR. ANKUR TYAGI
MAY / JUN 2021 EFFECT OF Y2O3 STABILIZED COATING WITH TRI-MODEL STRUCTURE ON BI-LAYERED THERMALLY GROWN OXIDE EVOLUTION IN NANO THERMAL BARRIER COATING SYSTEMS AT ELEVATED TEMPERATURES MR. AMIT KUMAR TRIPATHI
MAY / JUN 2021 HEAT TRANSFER AND PRESSRUE DROP OF CO2 HYDRATE MIXTURE IN PIPELINE MR. DILIP KUMAR
MAY / JUN 2021 KEY TECHNOLOGY RESEARCH ON THE EFFICIENT EXPLOITATION AND COMPREHENSIVE UTILIZATION OF RESOURCES IN THE DEEP JUNCHUAN NICKEL DEPOSIT MR. ASHUTOSH YADAV
MAY / JUN 2021 PARAMETRIC ANALYSIS OF SMALL SCALE CAVITY RECEIVER WITH OPTIMUM SHAPE FOR SOLAR POWERED CLOSED BRAYTON CYCLE APPLICATIONS MR. BHARTENDU M. TRIPATHI
MAY / JUN 2021 REVIEW OF JOURNAL BEARING MATERIALS AND CURRENT TRENDS MR. NIRMAL GARG
MAY / JUN 2021 YIELD STRESS FLUID FLOWS: A REVIEW OF EXPERIMENT DATA MR. MAYANK KR. TIWARI
MAY / JUN 2021 INFLUENCES BETWEEN DESIGN CHARACTERISTICS OF LEAN MANUFACTURING SYSTEMS AND IMPLICATIONS FOR THE DESIGN PROCESS DR. KAMAL KR. MITTAL
MAY / JUN 2021 A MULTI-LAYERED AND KILL CHAIN BASED SECURITY ANALYSIS FRAMEWORK FOR CYBER PHYSICAL SYSTEM DR. UMESH K. VISHWAKARM
MAY / JUN 2021 MODIFIED ISM/TISM PROCESS WITH SIMULTANEOUS TRANSITIVITY CHECKS FRO REDUCIGN DIRECT PAIR COMPARISIONS DR. SUMAN GOTHWAL
MAY / JUN 2021 ENHANCING MECHANICAL RESPONSE OF MONILITHIC MAGNESIUM USING NANO-NiTi (NITINOL) PARTICLES DR. NAMRATA GUPTA
MAY / JUN 2021 OPTIMAL OPERATION OF PUMPED-HYDRO STORAGE PLANTS WITH CONTINUOUS TIME-VARYING POWER PRICES DR. VISHWAS GROVER
MAY / JUN 2021 ADDITIVE MANUFACTURING OF PURE Ti WITH SUPERIOR MECHANICAL PERFORMANCE, LOW COST AND BIOCOMPATIBILITY FOR POTENTIAL REPLACEMENT OF Ti-6Al-4V DR. ALOK VARDHAN
MAY / JUN 2021 HOUSEHOLD PRODUCTION OF CERAMIC WATER FILTERS IN WETERN RAJASTHAN, INDIA MR. ANSHUL KUMAR PANCHBHAIYA
JUN / JUL 2021 A REVIEW OF METAL ADDITIVE MANUFACTURING TECHNOLOGIES MR. PRADEEP JAIN
JUN / JUL 2021 MEASURING THE LEANESS OF MANUFACTURING SYSTEMS: A CASE STUDY OF FORD MOTOR COMPANY AND GENERAL MOTORS MR. VIVEK KR. PANSARI
JUN / JUL 2021 COMPARATIVE ASSESSMENT OF BUTANOL AND ALGAE OIL AS ALTERNATE FUEL FOR SI ENGINES 2019 MR. AJAY KANT DUBEY
JUN / JUL 2021 ADDITIVE MANUFACTURING WITH GMAW WELDING AND CMT TECHNOLOGY MR. H.S.CHAURASIYA
JUN / JUL 2021 EFFECTS OF TENSILE STRENGTH ON FRICTION WELDING CONDITION AND WELD SURFACE PROPERTIES OF FRICTION WELDED JOINTS BETWEEN PURE COPPER AND AUSTENITIC STAINLESS STEEL-REVIEW MR. JITENDRA YADAV
JUN / JUL 2021 ANALYZING SUPPLY CHAIN RESILIENCE: INTEGRATIGN THE CONSTRUCTS IN A CONCEPT MAPPING FRAMEWORK VIA A SYSTEMATIC LITERATURE REVIEW MR. GAJESH KUMAR
JUN / JUL 2021 REVIEW OF 4-D PRINTING MATERIALS AND THEIR PROPERTIES MR. ANKUR TYAGI
JUN / JUL 2021 THERMAL CYCLING BEHAVIOR OF THERMAL BARRIER COATINGS WITH HVOF NiCrAlY BOND COAT MR. AMIT KUMAR TRIPATHI
JUN / JUL 2021 SELF-LUBRICATING AND FRICTION PERFORMANCE OF A THREE-DIMENSIONAL-PRINTED JOURNAL BEARING MR. DILIP KUMAR
JUN / JUL 2021 EFFECTS OF VAPOR PRESSURE AND SUPER-HYDROPHOBIC NANOCOMPOSITE COATING ON MICROELECTRONICS RELIABILITY MR. ASHUTOSH YADAV
JUN / JUL 2021 ENERGETIC AND ECONOMIC ANALYSIS OF A NEW CONCEPT OF RESIDENTIAL APPLICATION MR. BHARTENDU M. TRIPATHI
JUN / JUL 2021 MODELLING AND ANALYSIS OF ELASTIC AND THERMAL DEFORMATIONS OF A HYBRID JOURNAL BEARING MR. NIRMAL GARG
JUN / JUL 2021 INNOVATIVE ACRYLIC THERMOPLASTIC COMPOSITES VERSUS CONVENTIONAL COMPOSITES: IMPROVING THE IMPACT PERFORMANCES MR. MAYANK KR. TIWARI
JUN / JUL 2021 SUSTAINABILITY ASSESSMENT OF MECHANICAL MANUFACTURING SYSTEMS IN THE INDUSTRIAL SECTOR DR. KAMAL KR. MITTAL
JUN / JUL 2021 STABLIZATION OF AN OPEN SOURCE FINITE VOLUME SOLVER FOR VISCOELASTIC FLUID FLOWS DR. UMESH K. VISHWAKARM
JUN / JUL 2021 ANALYSIS OF FMS PERFORMANCE MEASURES BY FUZZY TISM DR. SUMAN GOTHWAL
JUN / JUL 2021 USING LANTHANUM TO ENHANCE THE OVERALL IGNITION, HARDNESS, TENSILE AND COMPRESSIVE STRENGTHS OF Mg-0.5 Zr ALLOY AUTHOR LINKS OPEN OVERLAY PANEL DR. NAMRATA GUPTA
JUN / JUL 2021 A JAYA ALGORITHM FOR DISCRETE OPTIMIZATION PROBLEMS DR. VISHWAS GROVER
JUN / JUL 2021 POSITION CONTROL AND PERFORMANCE NALYSIS OF HYDRAULIC SYSTEM USING TWO PUMP-CONTROLLING STRATEGIES DR. ALOK VARDHAN
JUN / JUL 2021 A JAYA ALGORITHM FOR DISCRETE OPTIMIZATION PROBLEMS MR. ANSHUL KUMAR PANCHBHAIYA

ODD SEM 2020-21

DATE TITLE OF THE PAPER NAME OF FACULTY
AUG/SEP 2020 THE POTENTIAL OF ADDITIVE MANUFACTURING IN THE SMART FACTORY INDUSTRIAL 4.0: A REVIEW MR. PRADEEP JAIN
AUG/SEP 2020 GREEN MANUFACTURING DRIVERS AND THEIR RELATIONSHIPS FOR SMALL AND MEDIUM AND LARGE INDUSTRIES MR. VIVEK KR. PANSARI
AUG/SEP 2020 WATER, AIR EMISSIONS, AND COST IMPACTS OF AIR-COOLED MICROTURBINES FOR COMBINED COOLING, HEATIGN AND POWER SYSTEMS: A CASE STUDY IN ATLANTA REGION MR. AJAY KANT DUBEY
AUG/SEP 2020 MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ROBOT COLD METAL TRANSFER MR. H.S.CHAURASIYA
AUG/SEP 2020 FRICTION STIR PROCESSIGN OF MAGNESIUM ALLOYS-REVIEW MR. JITENDRA YADAV
AUG/SEP 2020 FIRM INNOVATION AND SUPPLY CHAIN RESILIENCE: A DYNAMIC CAPABILITY PERSPECTIVE MR. GAJESH KUMAR
AUG/SEP 2020 REPRESENTATION OF SURFACE ROUGHNESS IN FUSED DEPOSITION MODELING MR. ANKUR TYAGI
AUG/SEP 2020 COATING THICKNESS AND ROUGHNESS EFFECT ON STRESS DISTRIBUTION OF A356.0 UNDER THERMOD-MECHANICAL LOADING MR. AMIT KUMAR TRIPATHI
AUG/SEP 2020 EXPERIMENTAL INVESTIGATION OF THE ALUMINA/PARAFFIN THERMAL CONDUCTIVITY NANOFLUIDS WITH A NEW CORRELATED EQUATION ON EFFECTIVE THERMAL CONDUCTIVITY MR. DILIP KUMAR
AUG/SEP 2020 EFFICIENCY IMPROVEMENT OF MINI HYDRO PUMP STORAGE POWER PLANT USING ARCHIMEDES TURBINE MR. ASHUTOSH YADAV
AUG/SEP 2020 PARAMETRIC ANALYSIS OF SMALL SCALE CAVITY RECEIVER WITH OPTIMUM SHAPE FOR SOLAR POWERED CLOSED BRAYTON CYCLE APPLICATIONS MR. BHARTENDU M. TRIPATHI
AUG/SEP 2020 SELF-LUBRICATING AND DRICTION PERFORMANCE OF A THREE-DIMENSIONAL – PRINTED JOURNAL BEARING MR. NIRMAL GARG
AUG/SEP 2020 AN OVERVIEW OF METHOD STUDY AND ANAYSIS OF DIFFERENT RECORDING TECHNIQUES MS. AKRITI GUPTA
AUG/SEP 2020 OPTIMAL USE OF POWER-TO-GAS ENERGY STORAGE SYSTEMS IN AN 85% RENEWABLE ENERGY SCENARIO MR. MAYANK KR. TIWARI
AUG/SEP 2020 SUSTAINABILITY ASSESSMENT OF MECHANICAL MANUFACTURING SYSTEMS IN THE INDUSTRIAL SECTOR DR. KAMAL KR. MITTAL
AUG/SEP 2020 AUTONOMOUS GUIDED VEHICLES FOR SMART INDUSTRIES – THE STATE-OF-THE-ART AND RESEARCH CHALLENGES DR. SUMAN GOTHWAL
AUG/SEP 2020 MICROSTRUCTURAL CHARACTERIZATION AND TENSILE BGEHAVIOR OF FRICTION STIR PROCESSED AA6061/Al2Cu CAST ALUMINUM MATRIX COMPOSITES DR. NAMRATA GANGIL
AUG/SEP 2020 ROTATIONAL ABRASIVE FINISHING (RAF); NOVEL DESIGN FOR MICRO/NANOFINISHING MR. VISHWAS GROVER
AUG/SEP 2020 REDUCING FUEL CONSUMPTION OF FRONT END LOADER USING REGENERATIVE HYDRO-STATIC DRIVE CONFIGURATION-AN EXPERIMENTAL STUDY MR. ALOK VARDHAN
AUG/SEP 2020 GRADED LATTICE STRUCTURES: SIMULTANEOUS ENHANCEMENT IN STIFFNESS AND ENERGY ABSORPTION DR TARUN BHARDWAJ
AUG/SEP 2020 A JAYA ALGORITHM FOR DISCRETE OPTIMIZATION PROBLEMS MR ANSHUL KUMAR
SEP/OCT 2020 INTERNET OF THINGS (IOT): DEFINITIONS, CHALLENGES AND RECENT RESEARCH DIRECTIONS MR. PRADEEP JAIN
SEP/OCT 2020 ADOPTION OF INTEGRATED LEAN-GREEN-AGILE STRATEGIES FOR MODERN MANUFACTURING SYSTEMS MR. VIVEK KR. PANSARI
SEP/OCT 2020 COMPARING END-USE POTENTIAL FOR INDUSTRIAL FOOD-WASTE SOURCES MR. AJAY KANT DUBEY
SEP/OCT 2020 A COMPARATIVE STUDY OF MECHANICAL PROPERTIES OF METAL INERT GAS (MIG)-COLD METAL TRANSFER (CMT) AND FIBER LASER-MIG HYBRID WELDS FOR 6005A T6 EXTRUDED SHEET MR. H.S.CHAURASIYA
SEP/OCT 2020 FRICTION WELDING: PROCESS, TYPES AND ADVANTAGES MR. JITENDRA YADAV
SEP/OCT 2020 REVIEW OF QUANTITATIVE METHODS FOR SUPPLY CHAIN RESILIENCE ANALYSIS MR. GAJESH KUMAR
SEP/OCT 2020 OPTIMIZATION DESIGN FOR ULTRASONIC HORN WITH LARGE AMPLITUDE BASED ON GENETIC ALGORITHM MR. ANKUR TYAGI
SEP/OCT 2020 SYNTHESIS AND CHARACTERIZATION OF A WEAR-RESISTANT HYBRID POLYMER-CERAMIC COATING FOR DENTAL APPLICATIONS MR. AMIT KUMAR TRIPATHI
SEP/OCT 2020 HEAT TRANSFER AND PRESSRUE DROP OF CO2 HYDRATE MIXTURE IN PIPELINE MR. DILIP KUMAR
SEP/OCT 2020 OPTIMAL OOPERATION OF PUMPED-HYDRO STORAGE PLANTS WITH CONTINUOUS TIME-VARYING POWER PRICES MR. ASHUTOSH YADAV
SEP/OCT 2020 THE PERFORMANCE OF SOLAR COLLECTOR CPC (COMPOUND PARABOLIC CONCENTRATOR) TYPE WITH THREE PIPES COVERED BY GLASS TUBES MR. BHARTENDU M. TRIPATHI
SEP/OCT 2020 ASSESSMENT OF POLYMER COMPOSITES FOR HYDRODYNAMIC JOURNAL-BEARING APPLICATIONS MR. NIRMAL GARG
SEP/OCT 2020 PHARMACEUTICAL SUPPLY CHAIN MODELS: A SYNTHESIS FROM A SYSTEMS VIEW OF OOPERATIONS RESEARCH MS. AKRITI GUPTA
SEP/OCT 2020 INDIAN WIND ENERGY & ITS DEVELOPMENT-POLICIES-BARRIERS: AN OVERVIEW ENVIRONMENTAL AND SUSTANABILITY INDICATORS 1-2 (2019) 100003 MR. MAYANK KR. TIWARI
SEP/OCT 2020 TOWARDS AN ASSESSMENT CRITERION OF RECONFIGURABLE MANUFACTURIGN SYSTEMS WITHIN THE AUTOMOTIVE INDUSTRY DR. KAMAL KR. MITTAL
SEP/OCT 2020 AUTOMATED DUIDED VEHICLE (AGV) SYSTEM IN THE HEALTHCARE FACILITY DR. SUMAN GOTHWAL
SEP/OCT 2020 EMBEDDED MAGNETIC SHAPE MEMORY SENSORY PARTICLES IN LIGHTWEIGHT COMPOSITES FOR CRACK DETECTION DR. NAMRATA GANGIL
SEP/OCT 2020 EXPERIMENTAL INVESTIGATION INTO TOOL AGING EFFECT IN BALL END MAGNETORHEOLOGICAL FINISHING MR. VISHWAS GROVER
SEP/OCT 2020 CONTROL STRAGEGY OF ENERGY SAVING FOR POWER SYSTEM IN HYDRAULIC SURFACE DRILLING RIG MR. ALOK VARDHAN
SEP/OCT 2020 ADDITIVE MANUFACTURING OF PURE Ti WITH SUPERIOR MECHANICAL PERFORMANCE, LOW COST, AND BIOCOMPATIBILITY FOR POTENTIAL REPLACEMENT OF Ti-6A1-4V DR TARUN BHARDWAJ
SEP/OCT 2020 OPTIMAL DESIGN OF THE FLYWHEEL SUING NATURE INSPIRED OPTIMIZATION ALGORITHMS MR ANSHUL KUMAR
OCT/NOV 2020 USE OF BIOMATERIALS FOR 3D PRINTING BY FUSED DEPOSITION MODELING TECHNIQUE: A REVIEW MR. PRADEEP JAIN
OCT/NOV 2020 RANKING OF DRIVERS FOR INTEGRATED LEAN-GREEN MANUFACTURING FOR INDIAN MANUFACTURING SMEs MR. VIVEK KR. PANSARI
OCT/NOV 2020 FAILURE ANALYSIS OF CYCLIC DAMAGE TO A RAILWAY RAIL- A CASE STUDY MR. AJAY KANT DUBEY
OCT/NOV 2020 MICROSTRUCTURE AND MECAHNICAL PROPERTIES OF ROBOT COLD METAL TRANSFER Al5.5Zn2.5Mg2.2Cu ALUMINIUM ALLOY JOINTS MR. H.S.CHAURASIYA
OCT/NOV 2020 FRICTION STIR PROCESSIGN OF MAGNESIUM ALLOYS-REVIEW MR. JITENDRA YADAV
OCT/NOV 2020 ANALYSING SUPPLY CHAIN RESILIENCE: INTEGRATING THE CONSTRUCTS IN A CONCEPT MAPPING FRAMEWORK VIA A SYSTEMATIC LITERATURE REVIEW MR. GAJESH KUMAR
OCT/NOV 2020 RECONSTRUCTION OF DAMAGED PARTS BY INTEGRATION REVERS ENGINEERING (RE) AND RAPID PROTOTYPING (RP) MR. ANKUR TYAGI
OCT/NOV 2020 STRUCTURE AND DURABILITY EVALUATION OF YSZ+Al2O3 COMPOSITE TBCs WITH APS AND HVOF BOND COATS UNDER THERMAL CYCLING CONDITIONS MR. AMIT KUMAR TRIPATHI
OCT/NOV 2020 COMPUTER APPLICATIONS IN UNCONVENTIONAL MACHINING MR. DILIP KUMAR
OCT/NOV 2020 COMPUTER APPLICATIONS IN UNCONVENTIONAL MACHINING MR. ASHUTOSH YADAV
OCT/NOV 2020 ENERGETIC AND ECONOMIC ANALYSIS OF A NEW CONCENPT OF SOLAR CONCENTRATOR FOR RESIDENTIAL APPLICATION MR. BHARTENDU M. TRIPATHI
OCT/NOV 2020 POLYMER COMPOSITES FOR TRIBOLOGICAL APPLICATIONS MR. NIRMAL GARG
OCT/NOV 2020 ROBUS WAGNER-WHITIN ALGORITHM WITH UNCERTAIN COSTS MS. AKRITI GUPTA
OCT/NOV 2020 OPTIMAL USE OF POWER-TO-GAS ENERGY STORAGE SYSTEMS IN AN 85% RENEWABLE ENERGY SCENARIO MR. MAYANK KR. TIWARI
OCT/NOV 2020 INFLUENCES BETWEEN DESIGN CHARACTERISTICS OF LEAN MANUFACTURING SYTEMS AND IMPLICATIONS FOR THE DESIGN PROCESS DR. KAMAL KR. MITTAL
OCT/NOV 2020 ANALYSIS OF FMS PERFORMANCE MEASURES BY FUZZY TISM DR. SUMAN GOTHWAL
OCT/NOV 2020 INTERFACE FORMATION OF TiNi/Al COMPOSISTES FABRICATED BY SPARK PLASMA SINTERING DR. NAMRATA GANGIL
OCT/NOV 2020 A NOVEL MAGNETORHEOLOGICAL GEAR PROFILE FINISHING WITH HIGH SHAPE ACCURACY MR. VISHWAS GROVER
OCT/NOV 2020 THEORETICAL AND EXPERIMENTAL STUDIES OF THE SEADY-STATE PERFORMANCE OF A PRIMARY AND SECONDARY CONTROLLED CLOSED-CIRCUIT HYDROSTATIC DRIVE MR. ALOK VARDHAN
OCT/NOV 2020 THE ROLE OF TITANIUM ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ADDITIVELY MANUFACTURED C300 MARAGING STEELS DR TARUN BHARDWAJ
OCT/NOV 2020 DESIGN MODIFICATION FOR ANTI-CHOKING MECAHNISM IN THRESHER MACHINE MR ANSHUL KUMAR

EVEN SEM 2019-20

DATE TITLE OF THE PAPER NAME OF FACULTY
FEB 2020 USE OF BIOMATERIALS FOR 3D PRINTING BY FUSED DEPOSITION MODELING TECHNIQUE: A REVIEW MR. PRADEEP JAIN
FEB 2020 REVISITING SYSTEM PARADIGMS FROM THE VIEWPOINT OF MANUFACTURING SUSTAINABILITY ZHUMING BI MR. VIVEK KR. PANSARI
FEB 2020 WATER, AIR EMISSIONS, AND COST IMPACTS OF AIR-COOLED MICROTURBINES FOR COMBINED COOLING, HEATING AND POWER SYSTEMS: A CASE STUDY IN ATLANTA REGION MR. AJAY KANT DUBEY
FEB 2020 FABRICATION OF ALUMINUM MATRIX COMPOSITES REINFORCED WITH NANO- TO MICROMETER-SIZED SIC PARTICLES MR. H.S.CHAURASIYA
FEB 2020 FABRICATION OF METAL MATRIX COMPOSITES USING FRICTION STIR PROCESSING MR. JITENDRA YADAV
FEB 2020 A DECISION-MAKING MODEL FOR LEAN, AGILE, RESILIENT AND GREEN SUPPLY CHAIN MANAGEMENT MR. GAJESH KUMAR
FEB 2020 A NEW DESIGN OF VIBRATION ABSORBER FOR PERIODIC EXCITATION MR. ANKUR TYAGI
FEB 2020 GRAPHITE PARTICLES REINFORCED ZA-27 ALLOY COMPOSITE MATERIALS FOR JOURNAL BEARING APPLICATIONS MR. AMIT KUMAR TRIPATHI
FEB 2020 DISCHARGE COEFFICIENT OF HIGH VISCOSITY LIQUIDS THROUGH NOZZLE MR. DILIP KUMAR
FEB 2020 PROGRESS IN THE PHYSISORPTION CHARACTERIZATION OF NANOPOROUS GAS STORAGE MATERIALS MR. ASHUTOSH YADAV
FEB 2020 THERMAL PERFORMANCE OF AN EVACUATED TUBE HEAT PIPE SOLAR WATER HEATING SYSTEM IN COLD SEASON MR. BHARTENDU M. TRIPATHI
FEB 2020 TRIBOLOGY OF JOURNAL BEARINGS SUBJECTED TO BOUNDARY AND MIXED LUBRICATION MR. NIRMAL GARG
FEB 2020 PERFORMANCE OF AN AUTO REFRIGERANT CASCADE REFRIGERATOR OPERATING IN LIQUID REFRIGERANT SUPPLY MODE WITH DIFFERENT CASCADE HEAT EXCHANGERS. MS. AKRITI GUPTA
FEB 2020 SOCIO-ECONOMIC TRANSITION AND INEQUALITY OF ENERGY CONSUMPTION AMONG URBAN AND RURAL RESIDENTS IN CHINA MR. MAYANK KR. TIWARI
FEB 2020 UNDERSTANDING RECONFIGURABILITY OF MANUFACTURING SYSTEMS: AN EMPIRICAL ANALYSIS DR. KAMAL KR. MITTAL
FEB 2020 ANALYZING THE PARAMETERS AFFECTING THE PERFORMANCE OF A FLEXIBLE MANUFACTURING SYSTEM (FMS) USING INTERPRETIVE STRUCTURAL MODELING (ISM) APPROACH DR. SUMAN GOTHWAL
FEB 2020 EXPERIMENTAL DATA ON SURFACE ROUGHNESS AND
FORCE FEEDBACK ANALYSIS IN FRICTION STIR PROCESSED AA7075 E T651 ALUMINIUM METAL COMPOSITES
DR. NAMRATA GUPTA
FEB 2020 NANOFINIHING OF FLAT WORKPIECES USING ROTATION-MAGNETORHEOLOGICAL ABRASIVE FLOW FINISHING (R-MRAFF) PROCESS MR. VISHWAS GROVER
FEB 2020 ENERGY SAVING OF CUTTERHEAD HYDRAULIC DRIVE SYSTEM OF SHIELD TUNNELING MACHINE MR. ALOK VARDHAN
FEB 2020 A STUDY ON THE ADDITIVE MANUFACTURING OF A HIGH CHROMIUM NICKEL-BASED SUPERALLOY BY EXTREME HIGH-SPEED LASER METAL DEPOSITION. DR TARUN BHARDWAJ
FEB 2020 OPTICAL DESIGN OF THE FLYWHEEL USING NATURE INSPIRED OPTIMAZATION ALGORITHMS. MR ANSHUL KUMAR
JUN/JUL 2020 ADDITIVE MANUFACTURING METHODS A BRIEF OVERVIEW MR. PRADEEP JAIN
JUN/JUL 2020 SYSTEM IDENTIFICATION AND ESTIMATION FRAMEWORK FOR PIVOTAL AUTOMOTIVE BATTERY MANAGEMENT SYSTEM CHARACTERISTICS MR. VIVEK KR. PANSARI
JUN/JUL 2020 SMART GRIDS WITH INTELLIGENT PERIPHERY: AN ARCHITECTURE FOR THE ENERGY INTERNET MR. AJAY KANT DUBEY
JUN/JUL 2020 MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ROBOT COLD METAL TRANSFER MR. H.S.CHAURASIYA
JUN/JUL 2020 MAGNESIUM BASED COMPOSITE VIA FRICTION STIR PROCESSING MR. JITENDRA YADAV
JUN/JUL 2020 MEASURING THE BARRIERS TO RESILIENCE IN MANUFACTURING SUPPLY CHAINS USING GREY CLUSTERING AND VIKOR APPROACHES MR. GAJESH KUMAR
JUN/JUL 2020 FRICTIONAL EFFECTS ON GEAR TOOTH CONTACT ANALYSIS MR. ANKUR TYAGI
JUN/JUL 2020 MODAL VIBRATION RESPONSE MEASUREMENTS FOR CHARACTERIZATION OF COMPOSITE MATERIALS AND STRUCTURES MR. AMIT KUMAR TRIPATHI
JUN/JUL 2020 WIRE EDM SETUP PARAMETER INFLUENCE ON FUNCTIONAL SURFACE ROUGHNESS MR. DILIP KUMAR
JUN/JUL 2020 OPPORTUNITIES AND CHALLENGES IN DEEP MINING: A BRIEF REVIEW MR. ASHUTOSH YADAV
JUN/JUL 2020 A REVIEW ON THE COMPLEMENTARITY OF RENEWABLE ENERGY SOURCES: CONCEPT, METRICS, APPLICATION AND FUTURE RESEARCH DIRECTIONS MR. BHARTENDU M. TRIPATHI
JUN/JUL 2020 TRIBOLOGICAL ANALYSIS OF A HYDRODYNAMIC JOURNAL BEARING UNDER THE INFLUENCE OF SYNTHETIC AND BIOLUBRICANTS. MR. NIRMAL GARG
JUN/JUL 2020 STUDY ON REFRIGERATION SYSTEM DESIGNED FOR LOW TEMPERATURE MS. AKRITI GUPTA
JUN/JUL 2020 EXPERIMENTAL AND NUMERICAL STUDY OF A PV/THERMAL COLLECTOR EQUIPPED WITH A PV-ASSISTED AIR CIRCULATION SYSTEM: CONFIGURATION SUITABLE FOR BUILDING INTEGRATION MR. MAYANK KR. TIWARI
JUN/JUL 2020 TOWARDS AN ASSESSMENT CRITERION OF RECONFIGURABLE MANUFACTURING SYSTEMS WITHIN THE AUTOMOTIVE INDUSTRY DR. KAMAL KR. MITTAL
JUN/JUL 2020 APPLICATION OF MADM METHODS AS MOORA AND WEDBA FOR RANKING OF FMS FLEXIBILITY DR. SUMAN GOTHWAL
JUN/JUL 2020 INFLUENCE OF FRICTION STIR PROCESSING ON MICROSTRUCTURE AND TENSILE BEHAVIOR OF AA6061/AL3ZR CAST ALUMINUM MATRIX COMPOSITES DR. NAMRATA GUPTA
JUN/JUL 2020 NANO FINISHING OF STAINLESS STEEL TUBES USING ROTATIONAL MAGNETORHEOLOGICAL ABRASIVE FLOW FINISHING PROCESS. MR. VISHWAS GROVER
JUN/JUL 2020 CONTROL STRATEGY OF ENERGY SAVING FOR POWER SYSTEM IN HYDRAULIC SURFACE DRILLING RIG MR. ALOK VARDHAN
JUN/JUL 2020 INFLUENCE OF HEAT TREATMENT ON MICROSTRUCTURES AND MECHANICAL PROPERTIES OF K447A CLADDING LAYERS OBTAINED BY LASER SOLID FORMING DR TARUN BHARDWAJ
JUN/JUL 2020 OPTIMAL SHAPE SYNTHESIS OF A METALLIC FLYWHEEL USING NON DOMINATED SORTING JAYA ALGORITHM MR ANSHUL KUMAR
JUL/AUG 2020 THE POTENTIAL OF ADDITIVE MANUFACTURING IN THE SMART FACTORY INDUSTRIAL 4.0: A REVIEW MR. PRADEEP JAIN
JUL/AUG 2020 SMART CONTROL SYSTEMS FOR SMART MATERIALS MR. VIVEK KR. PANSARI
JUL/AUG 2020 CATALYST ENGINEERING FOR ELECTROCHEMICAL ENERGY CONVERSION FROM WATER TO WATER: WATER ELECTROLYSIS AND THE HYDROGEN FUEL CELL MR. AJAY KANT DUBEY
JUL/AUG 2020 MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ROBOT COLD METAL TRANSFER AL5.5ZN2.5MG2.2CU ALUMINIUM ALLOY JOINTS MR. H.S.CHAURASIYA
JUL/AUG 2020 INFLUENCE OF CERAMIC PARTICULATE TYPE ON MICROSTRUCTURE AND TENSILE STRENGTH OF ALUMINUM MATRIX COMPOSITES PRODUCED USING FRICTION STIR PROCESSING MR. JITENDRA YADAV
JUL/AUG 2020 SUPPLY CHAIN RESILIENCE: DEfiNITIONS AND QUANTITATIVE MODELLING APPROACHES – A LITERATURE REVIEW MR. GAJESH KUMAR
JUL/AUG 2020 DESIGN OPTIMIZATION OF CAM & FOLLOWER MECHANISM OF AN INTERNAL COMBUSTION ENGINE FOR IMPROVING THE ENGINEEFFICIENCY MR. ANKUR TYAGI
JUL/AUG 2020 CHARACTERISTICS OF CARBON FIBER PHENOLIC COMPOSITE FOR JOURNAL BEARING MATERIALS MR. AMIT KUMAR TRIPATHI
JUL/AUG 2020 RESEARCH ON CONVENTION HEAT TRANSFER CHARACTER OF SUPER CRITICAL CO2 FLOW INSIDE HORIZONTAL TUBE MR. DILIP KUMAR
JUL/AUG 2020 KEY TECHNOLOGY RESEARCH ON THE EFFICIENT EXPLOITATION AND COMPREHENSIVE UTILIZATION OF RESOURCES IN THE DEEP JINCHUAN NICKEL DEPOSIT MR. ASHUTOSH YADAV
JUL/AUG 2020 DEVELOPMENT OF AN ENVIRONMENTALLY FRIENDLY PV/T SOLAR PANEL MR. BHARTENDU M. TRIPATHI
JUL/AUG 2020 TRIBOLOGICAL ANALYSIS OF A HYDRODYNAMIC JOURNAL BEARING UNDER THE INFLUENCE OF SYNTHETIC AND BIOLUBRICANTS. MR. NIRMAL GARG
JUL/AUG 2020 SOLAR ENERGY FOR REFRIGERATION AND AIR CONDITIONING MS. AKRITI GUPTA
JUL/AUG 2020 EXPERIMENTAL INVESTIGATION OF LATENT HEAT THERMAL ENERGY STORAGE USING PCMS WITH DIFFERENT MELTING TEMPERATURES FOR BUILDING RETROFIT MR. MAYANK KR. TIWARI
JUL/AUG 2020 RECONFIGURATION-ORIENTED OPPORTUNISTIC MAINTENANCE POLICY FOR RECONFIGURABLE MANUFACTURING SYSTEMS DR. KAMAL KR. MITTAL
JUL/AUG 2020 MODELING AND ANALYSIS OF FMS PERFORMANCE VARIABLES BY FUZZY TISM DR. SUMAN GOTHWAL
JUL/AUG 2020 INFLUENCES OF FRICTION STIR PROCESSING PARAMETERS ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SIC/AL COMPOSITES FABRICATED BY MULTI-PIN TOOL DR. NAMRATA GUPTA
JUL/AUG 2020 A NOVEL MAGNETORHEOLOGICAL GEAR PROFILE FINISHING WITH HIGH SHAPE ACCURACY MR. VISHWAS GROVER
JUL/AUG 2020 THEORETICAL AND EXPERIMENTAL STUDIES OF THE STEADY-STATE PERFORMANCE OF A PRIMARY AND SECONDARY-CONTROLLED LOSED-CIRCUIT HYDROSTATIC DRIVE MR. ALOK VARDHAN
JUL/AUG 2020 EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURAL EVOLUTION OF A NICKEL-BASED SUPERALLOY ADDITIVE-MANUFACTURED BY LASER POWDER BED FUSION DR TARUN BHARDWAJ
JUL/AUG 2020 A MODIFIED JAYA ALGORITHM FOR MIXED VARIABLE OPTIMIZATION PROBLEMS. MR ANSHUL KUMAR

ODD SEM 2019-20

DATE TITLE OF THE PAPER SPEAKER
AUG 2019 A REVIEW PAPER ON “IOT” & ITS SMART APPLICATIONS MR. PRADEEP JAIN
AUG 2019 LEAN IMPLEMENTATION AND ITS BENEFITS TO PRODUCTION INDUSTRY MR. VIVEK KR. PANSARI
AUG 2019 NUCLEAR POWER PLANT ACCIDENT IDENTIFICATION SYSTEM WITH “DON’T KNOW” RESPONSE CAPABILITY: NOVEL DEEP LEARNING-BASED APPROACHES MR. AJAY KANT DUBEY
AUG 2019 OPTIMIZATION OF DEEP PENETRATION LASER WELDING OF THICK STAINLESS STEEL WITH A 10KW FIBER LASER MR. H.S.CHAURASIYA
AUG 2019 EXTENDED QUASILOCAL THERMODYNAMICS OF SCHWARZCHILD-ANTI DE SITTER BLACK HOLES MR. JITENDRA YADAV
AUG 2019 A FUZZY APPROACH TO ANALYZING THE LEVEL OF RESILIENCE IN MANUFACTURING MR. GAJESH KUMAR
AUG 2019 EFFECT OF CRYOGENIC TREATMNET OF TUNGSTEN CARBIDETOOLS ON CUTTING FORCE AND POWER CONSUMPTION IN CNC MILLING PROCESS MR. ANKUR TYAGI
AUG 2019 BIO-CATHODE MATERIALS EVALUATION IN MICROBIAL FUEL CELLS: A COMPARISON OF GRAPHITE FELT, CARBON PAPER AND STAINLESS STEEL MECH MATERIALS MR. AMIT KUMAR TRIPATHI
AUG 2019 FABRICATION AND MECHANICAL TESTING OF ULTRA LIGHT FOLDED LATTICE-CORE SANDWITH CYLINDERS MR. DILIP KUMAR
AUG 2019 EFFECTS OF MECHANICAL STRESSES ON THE RELIABILITY OF LOW-TEMPERATURE POLYCRYSTALLINE SILICON THIN FILM TRANSISTORS FOR FOLDABLE DISPLAYS MR. ASHUTOSH YADAV
AUG 2019 ENHANCED SOLAR STEAM GENERATION USING CARBON NANO TUBE MEMBRANCE DISTILLATION DEVICE WITH HEAT LOCALIZATION MR. BHARTENDU M. TRIPATHI
AUG 2019 FDM PROCESS PARAMETERS INFLUENCE OVER THE MECHANICAL PROPERTIES OF POLYMER SPECIMENS: A REVIEW MR. NIRMAL GARG
AUG 2019 EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER IN AN OPEN-CELL ALUMINUM FOAMS MR. RAJAT GOEL
AUG 2019 PERFORMANCE ANALYSIS OF A KALINA CYCLE FOR A CENTRAL RECEIVER SOLAR THERMAL POWER PLANT WITH DIRECT STEAM GENERATION MS. AKRITI GUPTA
AUG 2019 A COMPARISON OF THE ENVIRONMENTAL IMPACTS OF DIFFERENT CATEGORIES OF INSULATION MATERIALS MR. MAYANK KR. TIWARI
AUG 2019 IMPACT OF LEAN MANUFACTURING AND ENVIRONMENTAL MANAGEMENT ON BUSINESS PERFORMANCE DR. KAMAL KR. MITTAL
AUG 2019 A GRAPHICAL TOOL TO EVALUATE THE PERFORMANCE OF PRODUCTION SYSTEM DR. UMESH VISHWAKARMA
AUG 2019 A DEVELOPMENT OF FLEXIBLE MANUFACTURING SYSTEM USING POLMAN T-100 VISE CASTING COMPONENT AS A CASE STUDY DR. SUMAN GOTHWAL
AUG 2019 ENHANCEMENT IN BIO-CORROSION RESISDANCE OF METALLIC GLASS BY SEVERE SURFACE DEFORMATION DR. NAMRATA GUPTA
AUG 2019 OPTIMIZATION OF TURNING PROCESS USING ARTIFICIAL INTELLIGENCE TECHNOLOGY MS. SUNITA TIWARI
AUG 2019 ANALYSIS OF SURFACE FINISHING MECHANISM IN A NEWLY DEVELOPED ROTATIONAL MAGNETORHEOLOGICAL HONING PROCESS FOR ITS PRODUCTIVITY IMPROVEMENT MR. VISHWAS GROVER
AUG 2019 QUALITY MANAGEMENT IN EDUCATION MR. NARENDRA KUMAR
AUG 2019 SYSTEMATIC PROCESS ANALYSIS IN INDUSTRIAL BUSINESS MANAGEMENT: A PRACTITIONER TOOL KIT MS. PRIYANSHU SHARMA
AUG 2019 DYNAMIC ANALYSIS OF A HYDRO-MOTOR DRIVE SYSTEM USING PRIORITY VALVE MR. ALOK VARDHAN
AUG 2019 PHASE-FIELD MODELLING OF CRYSTAL NUCLEATION IN UNDER COOLED LIQUIDS – A REVIEW DR. AVIRAL MISHRA
SEP 2019 OBJECT DETECTION AND RECOGNITION IN IMAGES MR. PRADEEP JAIN
SEP 2019 ARCHITECTURAL DESIGN AND RELIABILITY ANALYSIS OF A FAIL-OPERATIONAL BRAKE-BY-WIRE SYSTEM FROM ISO 26262 PERSPECTIVES MR. VIVEK KR. PANSARI
SEP 2019 HEAT TRANSFER PERFORMANCE ANALYSIS OF A LARGE-SCALE SEPARTE HEAT PIPE WITH A BUILT-IN TUBE MR. AJAY KANT DUBEY
SEP 2019 MICRO-FRICTION STIR WELDING OF TITAN ZINC SHEETS MR. H.S.CHAURASIYA
SEP 2019 CONDENSED MATTER PHYSICS, HYBRID ENERGY AND ENTROPY PRINCIPLES, AND THE HYBRID FIRST AND SECOND LAWS OF THERMODYNAMICS MR. JITENDRA YADAV
SEP 2019 ALIGNING SUPPLY CHAIN DESIGN FOR BOOSTING RESILIENCE MR. GAJESH KUMAR
SEP 2019 OPTIMISATION OF CUTTING PARAMETERS FOR MINIMIZING CARBON EMISSION AND MAXIMISING CUTTING QUALITY IN TURNING PROCESS MR. ANKUR TYAGI
SEP 2019 ELECTRO CHEMICAL NITRIDATIO OF A STAINLESS STEEL FOR PEMFC BIPOLAR PLATES MR. AMIT KUMAR TRIPATHI
SEP 2019 TOUGHNESS AND MICRO STRUCTURAL FACTORS OF Ti6Al4V ALLOY MR. DILIP KUMAR
SEP 2019 STUDY ON CHEMICAL MECHANICAL POLISHING OF SILICON WAFER WITH MEGASONIC VIBRATION ASSISTED MR. ASHUTOSH YADAV
SEP 2019 EMERGENT SYNTHESIS OF MOTION PATTERNS FO LOCOMOTION ROBOTS MR. BHARTENDU M. TRIPATHI
SEP 2019 POLYMER COMPOSITES FOR TRIBOLOGICAL APPLICATIONS MR. NIRMAL GARG
SEP 2019 MAGNETIC ACTIVATED CARBON LOADED WITH TUNGSTEN OXIDE NANOPARTICLES FOR ALUMINUM REMOVAL FROM WATERS MR. RAJAT GOEL
SEP 2019 RADIATION AND CHEMICAL REACTION EFFECTS ON THE BOUNDARY LAYER MHD CASSON FLUID ON A VERTICAL PLATE EMBEDDED IN THE POROUS MEDIUM MS. AKRITI GUPTA
SEP 2019 ENVIRONMENTAL SCIENCE & POLICY MR. MAYANK KR. TIWARI
SEP 2019 SIMULTANEOUS OPTIMIZATION OF LAYOUT AND TASK SCHEDUEL FOR ROBOTIC CELLULAR MANUFACTURING SYSTEMS DR. KAMAL KR. MITTAL
SEP 2019 SIMULTANEOUS OPTIMIZATION OF LAYOUT AND TASK SCHEDUEL FOR ROBOTIC CELLULAR MANUFACTURING SYSTEMS DR. UMESH VISHWAKARMA
SEP 2019 MODELLING OF FLEXIBLE MANUFACTURING SYSTEM: A REVIEW DR. SUMAN GOTHWAL
SEP 2019 THE EFFECT OF THIN FILM ADHESI9VES ON MODE I INTERLAMINAR FRACTURE TOUGHNESS IN CARBON FIBER COMPOSITES WITH SHAPE MEMORY ALLOY INSERTS DR. NAMRATA GUPTA
SEP 2019 SCA-A SINE COSING ALGORITHM FOR SOLVING OPTIMIZATION PROBLEMS MS. SUNITA TIWARI
SEP 2019 A NOVEL MAGNETORHEOLOGICAL GEAR PROFILE FINISHING WITH HIGH SHAPE ACCURACY MR. VISHWAS GROVER
SEP 2019 THE IMPACT OF LEADERSHIP QUALITIES ON QUALITY MANAGEMENT IMPROVEMENT MR. NARENDRA KUMAR
SEP 2019 A NEUTROSOPHIC EXTENSION OF THE MULTIMOORA METHOD MS. PRIYANSHU SHARMA
SEP 2019 ANALYSIS OF DECAY CHARACTERISTICS OF AN ACCUMULATOR IN AN OPEN-CIRCUIT HYDROSTATIC SYSTEM WITH PUMP LOADING MR. ALOK VARDHAN
SEP 2019 X-RAY PHOTOELECTRON SPECTROSCOPY; TOWARDS RELIABLE BINDING ENERGY REFERENCING DR. AVIRAL MISHRA
OCT 2019 OBJECT DETECTION WITH DEEP LEARNING: A REVIEW MR. PRADEEP JAIN
OCT 2019 LEAN CAN BE A SURVIVAL STRATEGY DURING RECESSIONARY TIMES MR. VIVEK KR. PANSARI
OCT 2019 RECENT PROGRESS OF THIN FILM SOLAR CELLS MR. AJAY KANT DUBEY
OCT 2019 THERMAL MODELING OF LASER WELDING AND RELATED PROCESSES: A LITERATURE REVIEW MR. H.S.CHAURASIYA
OCT 2019 NON-EQUILIBRIUM THERMODYANMICS OF BIOLOGICAL SIGNAL TRANSDUCTION PREDICTS CONSERVATION OF ENTROPY PRODUCTION RATE MR. JITENDRA YADAV
OCT 2019 SUPPLY CHAIN PERFORMANCE MEASUREMENT AND EVALUATION: A MIXED SUSTAINABILITY AND RESILIENCE APPROACH MR. GAJESH KUMAR
OCT 2019 PARAMETER OPTIMIZATION OF MODERN MACHINING PROCESSES USING TEACHING-LEARNING-BASED OPTIMIZATION ALGORITHM MR. ANKUR TYAGI
OCT 2019 EFFECT OF SURFACE ROUGHNESS ON EARLY STAGES OF PITTING CORROSION OF TYPE 301 STAINLESS STEEL MR. AMIT KUMAR TRIPATHI
OCT 2019 CORRELATION OF BIAXIAL YIELD BEHAVIOR IN COPPER WITH CRYSTALLOGRAPHIC TEXTURE FOR STRAINS IN THE RANGE 10-4-10-2 MR. DILIP KUMAR
OCT 2019 SOLID STATE FOAMING OF POLY BASED ON PERIODICAL CO2– RENEWING SORPTION PROCESS MR. ASHUTOSH YADAV
OCT 2019 START-UP AND LONG-TERM PERFORMANCE OF ANAMMOX MOVING BED BIOFILM REACTOR SEEDED WITH GRANULAR BIOMASS MR. BHARTENDU M. TRIPATHI
OCT 2019 WEAR AND FRICTION BEHAVIOUR OF ALUMINIUM METAL COMPOSITE REINFORCED WITH GRAPHITE PARTICLES MR. NIRMAL GARG
OCT 2019 AN ARTIFICIAL NEURAL NETWORK MODEL FOR PREDICTING JOINT PERFORMANCE IN ULTRASONIC WELDING OF COMPOSITES MR. RAJAT GOEL
OCT 2019 ANALYSIS OF TORSIONAL STIFFNESS OF THE FRAME OF A FORMULA STUDENT VEHICLE MS. AKRITI GUPTA
OCT 2019 ECONOMIC AND ENVIRONMENTAL EFFICIENCY OF UK AND IRELAND WATER COMPANIES: INFLUENCE OF EXOGENOUS FACORS AND RURALITY MR. MAYANK KR. TIWARI
OCT 2019 RECONFIGURATION-ORIENTED OPPORTUNISTIC MAAINTENANCE POLICY FOR RECONFIGURABLE MANUFACTURING SYSTEMS DR. KAMAL KR. MITTAL
OCT 2019 RECONFIGURTION-ORIENTED OPPORTUNISTIC MAINTENANCE POLICY FOR RECONFIGURABLE MANUFACTURING SYSTEMS DR. UMESH VISHWAKARMA
OCT 2019 PREDICTING BOTTLENECKS IN MANUFACTURING SHOPS THROUGH CAPACITY AND DEMAND OBSERVATIONS FROM MULTIPLE PERSPECTIVES DR. SUMAN GOTHWAL
OCT 2019 SHAPE MEMORY ALLOY IN FIBRE-REINFORCED POLYMER COMPOSITES DR. NAMRATA GUPTA
OCT 2019 MULTI-OBJECTIVE OPTIMIZATION FOR IMPROVING MECHINABILITY OF TI-6AI-4V USING RSM AND ADVANCED ALGORITHMS MS. SUNITA TIWARI
OCT 2019 MODELING AND SIMULATION OF SURFACE ROUGHNESS IN MAGNETORHEOLOGICAL FLUID BASED HONING PROCESS MR. VISHWAS GROVER
OCT 2019 QUALITY DESTINATION MANAGEMENT MR. NARENDRA KUMAR
OCT 2019 SUPPLY CHAIN MANAGEMENT AND THE CIRCULAR ECONOMY: TOWARDS THE CIRCULAR SUPPLY CHAIN MS. PRIYANSHU SHARMA
OCT 2019 DETERMINATION OF THE OPTIMUM STEADY-STATE PERFORMANCE OF AN OPEN-LOOP AND A CLOSED-LOOP VALVE-CONTROLLED HYDRO-MOTOR DRIVE: A DESIGN APPROACH MR. ALOK VARDHAN
OCT 2019 BIO PROCESS-INSPIRED FABRICATION OF MATERIALS WITH NEW STRUCTURES AND FUNCTIONS DR. AVIRAL MISHRA
NOV 2019 OBJECTIVE IS TO DETECT OF OBJECTS USIGN YOU ONLY LOOK ONCE (YOLO) APPROACH MR. PRADEEP JAIN
NOV 2019 FAILURE ANALYSIS AND RELIABILITY IMPROVEMENT OF SMALL TURBINE ENGINE BLADES MR. VIVEK KR. PANSARI
NOV 2019 CONVEPTUAL DESIGN AND OPTIMIZATION OF POWER GENERATION SYSTEM FOR LEAD-BSED REACTOR MR. AJAY KANT DUBEY
NOV 2019 SYSTEMATIC INVESTIGATION OF THE FATIGUE PERFORMANCE OF A FRICTION STIR WELDED LOW ALLOY STEEL MR. H.S.CHAURASIYA
NOV 2019 INVESTIGATING THE EFFECTS OF BULKY ALLYLIC SUBSTITUENTS ON THE REGIOREGULARITY AND TEHRMODYNAMICS OF ROMP ON CYCLOPENTENE MR. JITENDRA YADAV
NOV 2019 A MODULAR ANALYSIS FOR THE SUPPLY CHAIN RESILIENCE TRIANGLE MR. GAJESH KUMAR
NOV 2019 ENVIRONMENT FRIENDLY MACHINING OF Ni-Cr-Co BASED SUPER ALLOY USING DIFFERENT SUSTAINABLE TECHNIQUES MR. ANKUR TYAGI
NOV 2019 STUDY ON MICROSTRUCTURE AND MECHANICAL PROPERTIES ON 304STAINLESS STEEL JOINTS BY TIG, LASER AND LASER-TIG HYBRID WELDING MR. AMIT KUMAR TRIPATHI
NOV 2019 TIME-DEPENDENT RECOVERY OF THE ELASTIC MODULUS IN THERMALLY SHOCKED POLYCRYSTALLINE YTTRIUM IRON GARNET (YIG) MR. DILIP KUMAR
NOV 2019 TECHNICAL INNOVATIONS & PATIENT SUPPORT IN RADIATION ONCOLOGY MR. ASHUTOSH YADAV
NOV 2019 A NOVEL ANAMMOX PROCESS COMBINED WITH VIBRATION TECHNOLOGY MR. BHARTENDU M. TRIPATHI
NOV 2019 MECHANICAL PROPERTIES OPTIMIZATION OF POLY-ETHER-ETHER-KETONE VIA FUSED DEPOSITION MODELING MR. NIRMAL GARG
NOV 2019 PREPARATION OF BIOLOGICAL ACTIVATED CARBON (BAC) USING ALUMINUM SALTS CONDITIONED SLUDGE CAKE FOR THE BIO-REFRACTORY ORGANIC CONTAMINANTS REMOVAL FROM ANAEROBICALLY DIGESTED LIQUOR MR. RAJAT GOEL
NOV 2019 MATHEMATICAL MODELING OF AXIAL OSCILLATION TOOLS IN HIGH-ANGLE WELLS MS. AKRITI GUPTA
NOV 2019 A LIFE CYCLE ASSESSMENT OF THE CONSTRUCTION PHASE OF ELEVEN MICRO-HYDROPROWER INSTALLATION IN THE UK MR. MAYANK KR. TIWARI
NOV 2019 A GRAPHICAL TOOL TO EVALUATE THE PERFORMANCE OF PRODUCTION SYSTEMS DR. KAMAL KR. MITTAL
NOV 2019 IMPACT OF LEAN MANUFACTURING AND ENVIRONMENTAL MANAGEMENT ON BUSINESS PERFORMANCE: ANEMPIRICAL STUDY OF MANUFACTURING FIRMS DR. UMESH VISHWAKARMA
NOV 2019 IDENTIFICATION OF PERFORMANCE VARIABLES WHICH AFFECT THE FMS: A STATE-OF-THE-ART REVIEW DR. SUMAN GOTHWAL
NOV 2019 BENDIGN MODEL FOR A LAMINATED COMPOSITE CANTILEVER BEAM WITH MULTIPLE EMBEDDED SHAPE MEMORY ALLOY LAYERS PRESENTING TENSILE-COMPRESSIVE ASYMMETRY DR. NAMRATA GUPTA
NOV 2019 MODELING AND PREDICTION OF SURFACE ROUGHNESS IN TURNING OPERATIONS USING ARTIFICIAL NEURAL NETWORK AND MULTIPLE REGRESSION METHOD MS. SUNITA TIWARI
NOV 2019 MAGNETORHEOLOGICAL NANO-FINISHING OF DIAMAGNETIC MATERIAL USING PERMANENT MAGNETS TOOLS MR. VISHWAS GROVER
NOV 2019 QUALITY MANAGEMENT AS A PART OF CRM MR. NARENDRA KUMAR
NOV 2019 AN INTEGRATED SUPPLY CHAIN MANAGEMENT TO MANUFACTURING INDUSTRIES MS. PRIYANSHU SHARMA
NOV 2019 MODEL-BASED PERFORMANCE ANALYSIS OF A HYBRID SUMMATION DRIVE USED IN OFF-HIGHWAY VEHICLES MR. ALOK VARDHAN

EVEN SEM 2018-19

Date Topic Speaker
23 February 2019 A review paper on 3D printing aspects and various processes used in the 3D printing Mr. Pradeep Jain
23 February 2019 Reliance on manufacturing performance measures, total quality management and organization performance Mr. Narender Kumar
23 February 2019 Examining the interaction between lean and sustainability principles in the management process of AEC industry Mr. Vivek Kr. Pansari
23 February 2019 Renewable energy awareness among future generation of Palestine Mr. Ajay Kant Dubey
15 February 2019 Optimization of different welding processes using statiscal and numerical approaches – A reference guide Mr. H.S.Chaurasiya
15 February 2019 Thermodynamics study of Hydrogen storage materials Mr. Jitendra Yadav
15 February 2019 Review of quantitative methods for supply chain resilience analysis Mr. Gajesh Kumar
15 February 2019 Wood fiber/polyolefin composites Mr. Mayank Agrawal
15 February 2019 The effects of schooling family and poverty on children’s attainment, potential and confidence Evidence from Kinondoni, Dares salaam, Tanzan Mr. Ankur Tyagi
15 February 2019 Advantages of using the ball on flat device in rolling contact testing of ceramics Mr. Amit Kumar Tripathi
9 February 2019 Fine finishing of internal surfaces using elastic abrasives  Dr. Aviral Misra
9 February 2019 Analysis of a new thermodynamics cycle for combined power and cooling using low and mid temperature solar collectors Mr. Bhartendu Mani
15 February 2019 Solar photovoltaic electricity: Current status and future prospects Mr. Dilip Kumar
15 February 2019 Design of aluminum alloy beams at elevated temperatures Mr. Neeraj Gupta
9 February 2019 Technical innovations & patient support in radiation oncology Mr. Ashutosh Yadav
9 February 2019 Design of aluminum alloy beams at elevated temperatures Mr. Rajat Goel
9 February 2019 Cyber physical system and their security issues Mr. Nirmal Garg
23 February 2019 A canonical framework for modeling elasto-viscoplasticity in complex fluids Mr. Mayank Kumar Tiwari
9 February 2019 Parametric optimization of ball end magneto rheological finishing process on EN-31 Mr. Vishwas Grover
23 February 2019 Introduction to the developing and design of a mechatronic system Ms. Akriti Gupa
9 February 2019 The effect of cutting speed on  tool wear and tool life when maching Inconel 718 with ceramic tools Ms. Sunita Tiwari
23 February 2019 Simultaneous optimization of layout and task schedule for robotic cellular manufacturing systems Dr. Kamal Kr. Mittal
23 February 2019 Cutting tool wear estimation for turning Dr. Umesh kr. vishwakarma
23 February 2019 A review on design of fixture Dr. Suman Gothwal
9 February 2019 Mechanical Behavior analysis of a friction stir welding

( FSW) for welded joint applied to polymer material

Dr. Namrata Gupta
23 March 2019 Design and analysis of fused deposition modeling 3D printer nozzle for color mixing Mr. Pradeep Jain
23 March 2019 The Impact of Quality Management Prratices on Performance and Competitive Advantage Mr. Narender Kumar
23 March 2019 Applying value stream mapping techniques to eliminate non-value- added waste for the procurement of endovascular stents Mr. Vivek Kr. Pansari
23 March 2019 Does energy price affect energy efficiency? Cross- country panel evidence Mr. Ajay Kant Dubey
15 March 2019 Optimization of deep penetration laser welding of thick stainless steel with a 10 KW fiber laser Mr. H.S.Chaurasiya
15 March 2019 Design methodology of hybrid turbine towards better extraction of wind energy Mr. Jitendra Yadav
15 March 2019 Supply chain resilience and structure : An evaluation framework Mr. Gajesh Kumar
15 March 2019 Upside- down composites: Electro ceramics without sintering Mr. Mayank Agrawal
23 March 2019 Hygroscopic ageing of nonstandard size sandwich composites with vinyl ester based composites faces and PVC foam core Mr. Ankur Tyagi
23 March 2019 Part deposition orientation studies in layered manufacturing Mr. Amit Kumar Tripathi
9 March 2019 Theoretical and applied fracture mechanics Dr. Aviral Misra
9 March 2019 PCM thermal storage in buildings: A state of art Mr. Bhartendu Mani
23 March 2019 Solar energy conversion by Dye- Sensitized photovoltaic cells Mr. Dilip Kumar
23 March 2019 A study of micro structure and mechanical properties of aluminum alloy using laser cleaning Mr. Neeraj Gupta
9 March 2019 Effects of mechanical stresses on the reliability of low temperature polycrystalline silicon thin film transistor for foldable displays Mr. Ashutosh Yadav
9 March 2019 A study of micro structure and mechanical properties of aluminum alloy using laser cleaning Mr. Rajat Goel
9 March 2019 Cyber physical systems in manufacturing Mr. Nirmal Garg
9 March 2019 Rotational abrasive finishing (RAF); novel design for micro/nanofinishing Mr. Vishwas Grover
15 March 2019 A procedure for design and optimization of A Railway Track Structure Ms. Akriti Gupta
9 March 2019 Study on the machinabilty characteristics of superalloy Inconel 718 during high speed turning Ms. Sunita Tiwari
15 March 2019 Reconfiguration -oriented opportunistic maintence policy for reconfigurable manufacturing systems Dr. Kamal Kr. Mittal
9 March 2019 Investigation on the effect of tool pin profiles on mechanical and microstructure properties of friction stir butt and scarf welded Aluminum Alloy 6063 Dr. Namrata Gupta
15 March 2019 A multi-layered and kill chain based security analysis framework for cyber physical system Dr Umesh kr. vishwakarma
15 March 2019 Revisiting the critical failure factors of ERP to explore their relationships- An  ISM based approach Dr Suman Gothwal
27 April 2019 3D printing and the intellectual property system Mr. Pradeep Jain
27 April 2019 A framework for quality management research and an associated measurement instrument Mr. Narender Kumar
27 April 2019 The disintegration of lean manufacturing and lean management Mr. Vivek Kr. Pansari
27 April 2019 Assessment tools for urban energy planning Mr. Ajay Kant Dubey
27 April 2019 Numerical simulation of large spot laser+ MIG arc brazing- fusion welding of AI alloy to galvanized steel Mr. H.S.Chaurasiya
27 April 2019 Lithium Ion Battery Production Mr. Jitendra Yadav
27 April 2019 A modular analysis for the supply chain resilience triangle Mr. Gajesh Kumar
27 April 2019 Innovative acrylic thermoplastic composites versus conventional composites: Improving the impact performances Mr. Mayank Agrawal
19 April 2019 Dialogue thinking together and digital technology in the classroom: Some educational implications of a continuing line of inquiry Mr. Ankur Tyagi
19 April 2019 Experimental investigations and modeling of finishing force and torque in ultrasonic assisted magnetic abrasive finishing Mr. Amit Kumar Tripathi
5 April 2019 Machinability of natural- fibre – reinforced polymer composites: conventional vs ultrasonically- assisted machining Dr. Aviral Misra
19 April 2019 Technically challenges and opportunities for concentrating solar power with thermal energy storage Mr. Bhartendu Mani
19 April 2019 Performance evaluation solar photovoltaic/thermal system Mr. Dilip Kumar
19 April 2019 High ductility aluminum alloy made from powder by friction extrusion Mr. Neeraj Gupta
19 April 2019 Solid state farming of poly (ethylene terephthalate) based on periodical co2 renewing sorption process Mr. Ashutosh Yadav
19 April 2019 High ductility aluminum alloy made from powder by friction extrusion Mr. Rajat Goel
19 April 2019 Cyber physical systems technologies and application Part II Mr. Nirmal Garg
5 April 2019 Stablization of an open source finite volume solver for viscoelastic fluid flows Mr. Mayank Kumar Tiwari
5 April 2019 Experimental investigation into tool aging ehhect in ball end magnetorhelogical finishing Mr. Vishwas Grover
5 April 2019 Recent Development in Electrical motors and drives Ms. Akriti Gupa
5 April 2019 Cooling technique for improved productivity  in turning Ms. Sunita Tiwari
5 April 2019 Impact of lean manufacturing and environmental management on business performance :An empirical study of manufacturing firms Dr. Kamal Kr. Mittal
5 April 2019 Forces and temperature variation during friction stir welding of aluminum alloy AA6082-T6 Dr. Namrata Gupta
5 April 2019 Industrial big data analytics and cyber physical sytems for future maintenance & service innovation Dr. Umesh Vishwakarma
5 April 2019 Predicting bottlenecks in manufacturing shops through capacity and demand observation from multiple perspectives Dr. Suman Gothwal
10 May 2019 3D printing of multiple metallic materials via modified selective laser melting Mr. Pradeep Jain
10 May 2019 An Instrument for measuring the Critical Factors of  Quality Management Mr. Narender Kumar
10 May 2019 Early inference on reliability of upgraded automotive components by using past data and technical information Mr. Vivek Kr. Pansari
10 May 2019 Circular Economy and Renewable Energy Mr. Ajay Kant Dubey
25 May 2019 The Ecological footprint of laser beam welding Mr. H.S.Chaurasiya
25 May 2019 Thermodynamics of molecular solids in organic solvents Mr. Jitendra Yadav
25 May 2019 Aligning supply chain design for boosting resilience Mr. Gajesh Kumar
25 May 2019 Optimization of composites dowels shape in steel-concrete composite floor Mr. Mayank Agrawal
25 May 2019 Computers and students achievement: An analysis of the one laptop per child program in catalonia Mr. Ankur Tyagi
25 May 2019 Performance evaluation of electrical discharge machining (EDM) process using cryogenically cooled electrode Mr. Amit Kumar Tripathi
10 May 2019 Prediction  of surface roughness in extrusion- based additive manufacturing with machine learning Dr. Aviral Misra
17 May 2019 Design of a new high flux solar simulator for high temperature solar thermal and thermo chemical research Mr. Bhartendu Mani
25 May 2019 A review of solar photovoltaic technologies Mr. Dilip Kumar
25 May 2019 Numerical study and design of aluminum alloy channel section columns with welds Mr. Neeraj Gupta
17 May 2019 Study on chemical mechanical polishing of silicon wafer with mega sonic vibration assisted Mr. Ashutosh Yadav
17 May 2019 Numerical study and design of aluminum alloy channel section columns with welds Mr. Rajat Goel
17 May 2019 The impact of cyber physical systems on industrial services in manufactruign Mr. Nirmal Garg
17 May 2019 A Lagrangian-Eulerian framework for simulation of transient viscoelastic fluid flow Mr. Mayank Kumar Tiwari
10 May 2019 Modeling  and simulation of surface roughness in magnetorhelogical abrasive flow finishing (MRAFF) process Mr. Vishwas Grover
17 May 2019 Model for Railway Track Allocation Ms. Akriti Gupa
10 May 2019 Artificial neural networks for machining process surface roughness modeling Ms. Sunita Tiwari
17 May 2019 The operations -time chart : a graphical tool to performance of production systems – from batch -and -queue  to lean manufacturing Dr. Kamal Kr. Mittal
10 May 2019 Investigation of friction stir processing effect on AA 2014-T6 Dr. Namrata Gupta
17 May 2019 Recent advances and trends of cyber physical systems and big data analytics in industrial informatics Dr. Umesh Vishwakarma
17 May 2019 Human- machine cooperation in planning and scheduling: A case study on an unstable environment Dr. Suman Gothwal

ODD SEM 2018-19

Date Topic Speaker
30 August 2019 A REVIEW PAPER ON “IOT” & ITS SMART APPLICATIONS MR. PRADEEP JAIN
30 August 2019 LEAN IMPLEMENTATION AND ITS BENEFITS TO PRODUCTION INDUSTRY MR. VIVEK KR. PANSARI
30 August 2019 NUCLEAR POWER PLANT ACCIDENT IDENTIFICATION SYSTEM WITH “DON’T KNOW” RESPONSE CAPABILITY: NOVEL DEEP LEARNING-BASED APPROACHES MR. AJAY KANT DUBEY
30 August 2019 OPTIMIZATION OF DEEP PENETRATION LASER WELDING OF THICK STAINLESS STEEL WITH A 10KW FIBER LASER MR. H.S.CHAURASIYA
30 August 2019 EXTENDED QUASILOCAL THERMODYNAMICS OF SCHWARZCHILD-ANTI DE SITTER BLACK HOLES MR. JITENDRA YADAV
24 August 2019 A FUZZY APPROACH TO ANALYZING THE LEVEL OF RESILIENCE IN MANUFACTURING MR. GAJESH KUMAR
24 August 2019 EFFECT OF CRYOGENIC TREATMNET OF TUNGSTEN CARBIDETOOLS ON CUTTING FORCE AND POWER CONSUMPTION IN CNC MILLING PROCESS MR. ANKUR TYAGI
24 August 2019 BIO-CATHODE MATERIALS EVALUATION IN MICROBIAL FUEL CELLS: A COMPARISON OF GRAPHITE FELT, CARBON PAPER AND STAINLESS STEEL MECH MATERIALS MR. AMIT KUMAR TRIPATHI
16 August 2019 FABRICATION AND MECHANICAL TESTING OF ULTRA LIGHT FOLDED LATTICE-CORE SANDWITH CYLINDERS MR. DILIP KUMAR
16 August 2019 EFFECTS OF MECHANICAL STRESSES ON THE RELIABILITY OF LOW-TEMPERATURE POLYCRYSTALLINE SILICON THIN FILM TRANSISTORS FOR FOLDABLE DISPLAYS MR. ASHUTOSH YADAV
16 August 2019 ENHANCED SOLAR STEAM GENERATION USING CARBON NANO TUBE MEMBRANCE DISTILLATION DEVICE WITH HEAT LOCALIZATION MR. BHARTENDU M. TRIPATHI
16 August 2019 FDM PROCESS PARAMETERS INFLUENCE OVER THE MECHANICAL PROPERTIES OF POLYMER SPECIMENS: A REVIEW MR. NIRMAL GARG
16 August 2019 EXPERIMENTAL INVESTIGATION OF CONVECTIVE HEAT TRANSFER IN AN OPEN-CELL ALUMINUM FOAMS MR. RAJAT GOEL
16 August 2019 PERFORMANCE ANALYSIS OF A KALINA CYCLE FOR A CENTRAL RECEIVER SOLAR THERMAL POWER PLANT WITH DIRECT STEAM GENERATION MS. AKRITI GUPTA
16 August 2019 A COMPARISON OF THE ENVIRONMENTAL IMPACTS OF DIFFERENT CATEGORIES OF INSULATION MATERIALS MR. MAYANK KR. TIWARI
16 August 2019 IMPACT OF LEAN MANUFACTURING AND ENVIRONMENTAL MANAGEMENT ON BUSINESS PERFORMANCE DR. KAMAL KR. MITTAL
24 August 2019 A GRAPHICAL TOOL TO EVALUATE THE PERFORMANCE OF PRODUCTION SYSTEM DR. UMESH VISHWAKARMA
24 August 2019 A DEVELOPMENT OF FLEXIBLE MANUFACTURING SYSTEM USING POLMAN T-100 VISE CASTING COMPONENT AS A CASE STUDY DR. SUMAN GOTHWAL
24 August 2019 ENHANCEMENT IN BIO-CORROSION RESISDANCE OF METALLIC GLASS BY SEVERE SURFACE DEFORMATION DR. NAMRATA GUPTA
10 August 2019 OPTIMIZATION OF TURNING PROCESS USING ARTIFICIAL INTELLIGENCE TECHNOLOGY MS. SUNITA TIWARI
10 August 2019 ANALYSIS OF SURFACE FINISHING MECHANISM IN A NEWLY DEVELOPED ROTATIONAL MAGNETORHEOLOGICAL HONING PROCESS FOR ITS PRODUCTIVITY IMPROVEMENT MR. VISHWAS GROVER
30 August 2019 QUALITY MANAGEMENT IN EDUCATION MR. NARENDRA KUMAR
10 August 2019 SYSTEMATIC PROCESS ANALYSIS IN INDUSTRIAL BUSINESS MANAGEMENT: A PRACTITIONER TOOL KIT MS. PRIYANSHU SHARMA
10 August 2019 DYNAMIC ANALYSIS OF A HYDRO-MOTOR DRIVE SYSTEM USING PRIORITY VALVE MR. ALOK VARDHAN
24 August 2019 PHASE-FIELD MODELLING OF CRYSTAL NUCLEATION IN UNDER COOLED LIQUIDS – A REVIEW DR. AVIRAL MISHRA
28 September 2019 OBJECT DETECTION AND RECOGNITION IN IMAGES MR. PRADEEP JAIN
28 September 2019 ARCHITECTURAL DESIGN AND RELIABILITY ANALYSIS OF A FAIL-OPERATIONAL BRAKE-BY-WIRE SYSTEM FROM ISO 26262 PERSPECTIVES MR. VIVEK KR. PANSARI
28 September 2019 HEAT TRANSFER PERFORMANCE ANALYSIS OF A LARGE-SCALE SEPARTE HEAT PIPE WITH A BUILT-IN TUBE MR. AJAY KANT DUBEY
28 September 2019 MICRO-FRICTION STIR WELDING OF TITAN ZINC SHEETS MR. H.S.CHAURASIYA
28 September 2019 CONDENSED MATTER PHYSICS, HYBRID ENERGY AND ENTROPY PRINCIPLES, AND THE HYBRID FIRST AND SECOND LAWS OF THERMODYNAMICS MR. JITENDRA YADAV
28 September 2019 ALIGNING SUPPLY CHAIN DESIGN FOR BOOSTING RESILIENCE MR. GAJESH KUMAR
28 September 2019 OPTIMISATION OF CUTTING PARAMETERS FOR MINIMIZING CARBON EMISSION AND MAXIMISING CUTTING QUALITY IN TURNING PROCESS MR. ANKUR TYAGI
28 September 2019 ELECTRO CHEMICAL NITRIDATIO OF A STAINLESS STEEL FOR PEMFC BIPOLAR PLATES MR. AMIT KUMAR TRIPATHI
28 September 2019 TOUGHNESS AND MICRO STRUCTURAL FACTORS OF Ti6Al4V ALLOY MR. DILIP KUMAR
28 September 2019 STUDY ON CHEMICAL MECHANICAL POLISHING OF SILICON WAFER WITH MEGASONIC VIBRATION ASSISTED MR. ASHUTOSH YADAV
28 September 2019 EMERGENT SYNTHESIS OF MOTION PATTERNS FO LOCOMOTION ROBOTS MR. BHARTENDU M. TRIPATHI
28 September 2019 POLYMER COMPOSITES FOR TRIBOLOGICAL APPLICATIONS MR. NIRMAL GARG
14 September 2019 MAGNETIC ACTIVATED CARBON LOADED WITH TUNGSTEN OXIDE NANOPARTICLES FOR ALUMINUM REMOVAL FROM WATERS MR. RAJAT GOEL
14 September 2019 RADIATION AND CHEMICAL REACTION EFFECTS ON THE BOUNDARY LAYER MHD CASSON FLUID ON A VERTICAL PLATE EMBEDDED IN THE POROUS MEDIUM MS. AKRITI GUPTA
14 September 2019 ENVIRONMENTAL SCIENCE & POLICY MR. MAYANK KR. TIWARI
14 September 2019 SIMULTANEOUS OPTIMIZATION OF LAYOUT AND TASK SCHEDUEL FOR ROBOTIC CELLULAR MANUFACTURING SYSTEMS DR. KAMAL KR. MITTAL
14 September 2019 SIMULTANEOUS OPTIMIZATION OF LAYOUT AND TASK SCHEDUEL FOR ROBOTIC CELLULAR MANUFACTURING SYSTEMS DR. UMESH VISHWAKARMA
14 September 2019 MODELLING OF FLEXIBLE MANUFACTURING SYSTEM: A REVIEW DR. SUMAN GOTHWAL
14 September 2019 THE EFFECT OF THIN FILM ADHESI9VES ON MODE I INTERLAMINAR FRACTURE TOUGHNESS IN CARBON FIBER COMPOSITES WITH SHAPE MEMORY ALLOY INSERTS DR. NAMRATA GUPTA
6 September 2019 SCA-A SINE COSING ALGORITHM FOR SOLVING OPTIMIZATION PROBLEMS MS. SUNITA TIWARI
6 September 2019 A NOVEL MAGNETORHEOLOGICAL GEAR PROFILE FINISHING WITH HIGH SHAPE ACCURACY MR. VISHWAS GROVER
28 September 2019 THE IMPACT OF LEADERSHIP QUALITIES ON QUALITY MANAGEMENT IMPROVEMENT MR. NARENDRA KUMAR
6 September 2019 A NEUTROSOPHIC EXTENSION OF THE MULTIMOORA METHOD MS. PRIYANSHU SHARMA
6 September 2019 ANALYSIS OF DECAY CHARACTERISTICS OF AN ACCUMULATOR IN AN OPEN-CIRCUIT HYDROSTATIC SYSTEM WITH PUMP LOADING MR. ALOK VARDHAN
14 September 2019 X-RAY PHOTOELECTRON SPECTROSCOPY; TOWARDS RELIABLE BINDING ENERGY REFERENCING DR. AVIRAL MISHRA
25 October 2019 OBJECT DETECTION WITH DEEP LEARNING: A REVIEW MR. PRADEEP JAIN
25 October 2019 LEAN CAN BE A SURVIVAL STRATEGY DURING RECESSIONARY TIMES MR. VIVEK KR. PANSARI
25 October 2019 RECENT PROGRESS OF THIN FILM SOLAR CELLS MR. AJAY KANT DUBEY
25 October 2019 THERMAL MODELING OF LASER WELDING AND RELATED PROCESSES: A LITERATURE REVIEW MR. H.S.CHAURASIYA
12 October 2019 NON-EQUILIBRIUM THERMODYANMICS OF BIOLOGICAL SIGNAL TRANSDUCTION PREDICTS CONSERVATION OF ENTROPY PRODUCTION RATE MR. JITENDRA YADAV
12 October 2019 SUPPLY CHAIN PERFORMANCE MEASUREMENT AND EVALUATION: A MIXED SUSTAINABILITY AND RESILIENCE APPROACH MR. GAJESH KUMAR
12 October 2019 PARAMETER OPTIMIZATION OF MODERN MACHINING PROCESSES USING TEACHING-LEARNING-BASED OPTIMIZATION ALGORITHM MR. ANKUR TYAGI
12 October 2019 EFFECT OF SURFACE ROUGHNESS ON EARLY STAGES OF PITTING CORROSION OF TYPE 301 STAINLESS STEEL MR. AMIT KUMAR TRIPATHI
25 October 2019 CORRELATION OF BIAXIAL YIELD BEHAVIOR IN COPPER WITH CRYSTALLOGRAPHIC TEXTURE FOR STRAINS IN THE RANGE 10-4-10-2 MR. DILIP KUMAR
25 October 2019 SOLID STATE FOAMING OF POLY BASED ON PERIODICAL CO2– RENEWING SORPTION PROCESS MR. ASHUTOSH YADAV
18 October 2019 START-UP AND LONG-TERM PERFORMANCE OF ANAMMOX MOVING BED BIOFILM REACTOR SEEDED WITH GRANULAR BIOMASS MR. BHARTENDU M. TRIPATHI
18 October 2019 WEAR AND FRICTION BEHAVIOUR OF ALUMINIUM METAL COMPOSITE REINFORCED WITH GRAPHITE PARTICLES MR. NIRMAL GARG
18 October 2019 AN ARTIFICIAL NEURAL NETWORK MODEL FOR PREDICTING JOINT PERFORMANCE IN ULTRASONIC WELDING OF COMPOSITES MR. RAJAT GOEL
18 October 2019 ANALYSIS OF TORSIONAL STIFFNESS OF THE FRAME OF A FORMULA STUDENT VEHICLE MS. AKRITI GUPTA
18 October 2019 ECONOMIC AND ENVIRONMENTAL EFFICIENCY OF UK AND IRELAND WATER COMPANIES: INFLUENCE OF EXOGENOUS FACORS AND RURALITY MR. MAYANK KR. TIWARI
18 October 2019 RECONFIGURATION-ORIENTED OPPORTUNISTIC MAAINTENANCE POLICY FOR RECONFIGURABLE MANUFACTURING SYSTEMS DR. KAMAL KR. MITTAL
18 October 2019 RECONFIGURTION-ORIENTED OPPORTUNISTIC MAINTENANCE POLICY FOR RECONFIGURABLE MANUFACTURING SYSTEMS DR. UMESH VISHWAKARMA
4 October 2019 PREDICTING BOTTLENECKS IN MANUFACTURING SHOPS THROUGH CAPACITY AND DEMAND OBSERVATIONS FROM MULTIPLE PERSPECTIVES DR. SUMAN GOTHWAL
4 October 2019 SHAPE MEMORY ALLOY IN FIBRE-REINFORCED POLYMER COMPOSITES DR. NAMRATA GUPTA
4 October 2019 MULTI-OBJECTIVE OPTIMIZATION FOR IMPROVING MECHINABILITY OF TI-6AI-4V USING RSM AND ADVANCED ALGORITHMS MS. SUNITA TIWARI
4 October 2019 MODELING AND SIMULATION OF SURFACE ROUGHNESS IN MAGNETORHEOLOGICAL FLUID BASED HONING PROCESS MR. VISHWAS GROVER
25 October 2019 QUALITY DESTINATION MANAGEMENT MR. NARENDRA KUMAR
4 October 2019 SUPPLY CHAIN MANAGEMENT AND THE CIRCULAR ECONOMY: TOWARDS THE CIRCULAR SUPPLY CHAIN MS. PRIYANSHU SHARMA
4 October 2019 DETERMINATION OF THE OPTIMUM STEADY-STATE PERFORMANCE OF AN OPEN-LOOP AND A CLOSED-LOOP VALVE-CONTROLLED HYDRO-MOTOR DRIVE: A DESIGN APPROACH MR. ALOK VARDHAN
4 October 2019 BIO PROCESS-INSPIRED FABRICATION OF MATERIALS WITH NEW STRUCTURES AND FUNCTIONS DR. AVIRAL MISHRA
23 November 2019 OBJECTIVE IS TO DETECT OF OBJECTS USIGN YOU ONLY LOOK ONCE (YOLO) APPROACH MR. PRADEEP JAIN
9 November 2019 FAILURE ANALYSIS AND RELIABILITY IMPROVEMENT OF SMALL TURBINE ENGINE BLADES MR. VIVEK KR. PANSARI
9 November 2019 CONVEPTUAL DESIGN AND OPTIMIZATION OF POWER GENERATION SYSTEM FOR LEAD-BSED REACTOR MR. AJAY KANT DUBEY
9 November 2019 SYSTEMATIC INVESTIGATION OF THE FATIGUE PERFORMANCE OF A FRICTION STIR WELDED LOW ALLOY STEEL MR. H.S.CHAURASIYA
23 November 2019 INVESTIGATING THE EFFECTS OF BULKY ALLYLIC SUBSTITUENTS ON THE REGIOREGULARITY AND TEHRMODYNAMICS OF ROMP ON CYCLOPENTENE MR. JITENDRA YADAV
23 November 2019 A MODULAR ANALYSIS FOR THE SUPPLY CHAIN RESILIENCE TRIANGLE MR. GAJESH KUMAR
23 November 2019 ENVIRONMENT FRIENDLY MACHINING OF Ni-Cr-Co BASED SUPER ALLOY USING DIFFERENT SUSTAINABLE TECHNIQUES MR. ANKUR TYAGI
13 November 2019 STUDY ON MICROSTRUCTURE AND MECHANICAL PROPERTIES ON 304  STAINLESS STEEL JOINTS BY TIG, LASER AND LASER-TIG HYBRID WELDING MR. AMIT KUMAR TRIPATHI
13 November 2019 TIME-DEPENDENT RECOVERY OF THE ELASTIC MODULUS IN THERMALLY SHOCKED POLYCRYSTALLINE YTTRIUM IRON GARNET (YIG) MR. DILIP KUMAR
13 November 2019 TECHNICAL INNOVATIONS & PATIENT SUPPORT IN RADIATION ONCOLOGY MR. ASHUTOSH YADAV
13 November 2019 A NOVEL ANAMMOX PROCESS COMBINED WITH VIBRATION TECHNOLOGY MR. BHARTENDU M. TRIPATHI
13 November 2019 MECHANICAL PROPERTIES OPTIMIZATION OF POLY-ETHER-ETHER-KETONE VIA FUSED DEPOSITION MODELING MR. NIRMAL GARG
13 November 2019 PREPARATION OF BIOLOGICAL ACTIVATED CARBON (BAC) USING ALUMINUM SALTS CONDITIONED SLUDGE CAKE FOR THE BIO-REFRACTORY ORGANIC CONTAMINANTS REMOVAL FROM ANAEROBICALLY DIGESTED LIQUOR MR. RAJAT GOEL
9 November 2019 MATHEMATICAL MODELING OF AXIAL OSCILLATION TOOLS IN HIGH-ANGLE WELLS MS. AKRITI GUPTA
13 November 2019 A LIFE CYCLE ASSESSMENT OF THE CONSTRUCTION PHASE OF ELEVEN MICRO-HYDROPROWER INSTALLATION IN THE UK MR. MAYANK KR. TIWARI
9 November 2019 A GRAPHICAL TOOL TO EVALUATE THE PERFORMANCE OF PRODUCTION SYSTEMS DR. KAMAL KR. MITTAL
9 November 2019 IMPACT OF LEAN MANUFACTURING AND ENVIRONMENTAL MANAGEMENT ON BUSINESS PERFORMANCE: ANEMPIRICAL STUDY OF MANUFACTURING FIRMS DR. UMESH VISHWAKARMA
1 November 2019 IDENTIFICATION OF PERFORMANCE VARIABLES WHICH AFFECT THE FMS: A STATE-OF-THE-ART REVIEW DR. SUMAN GOTHWAL
1 November 2019 BENDIGN MODEL FOR A LAMINATED COMPOSITE CANTILEVER BEAM WITH MULTIPLE EMBEDDED SHAPE MEMORY ALLOY LAYERS PRESENTING TENSILE-COMPRESSIVE ASYMMETRY DR. NAMRATA GUPTA
1 November 2019 MODELING AND PREDICTION OF SURFACE ROUGHNESS IN TURNING OPERATIONS USING ARTIFICIAL NEURAL NETWORK AND MULTIPLE REGRESSION METHOD MS. SUNITA TIWARI
1 November 2019 MAGNETORHEOLOGICAL NANO-FINISHING OF DIAMAGNETIC MATERIAL USING PERMANENT MAGNETS TOOLS MR. VISHWAS GROVER
9 November 2019 QUALITY MANAGEMENT AS A PART OF CRM MR. NARENDRA KUMAR
1 November 2019 AN INTEGRATED SUPPLY CHAIN MANAGEMENT TO MANUFACTURING INDUSTRIES MS. PRIYANSHU SHARMA
1 November 2019 MODEL-BASED PERFORMANCE ANALYSIS OF A HYBRID SUMMATION DRIVE USED IN OFF-HIGHWAY VEHICLES MR. ALOK VARDHAN

Funded Projects

Title Funding Agency / Scheme Faculty Status
Development of Functionally Graded material via Friction Stir Processing Route AKTU Lucknow Dr Namrata Gupta Completed
Design and Development of Metal Three D printer AKTU Lucknow Mr Pradeep jain Ongoing

Research Projects

Title Faculty Status
Development of Functionally Graded material via Friction Stir Processing Route Dr Namrata Gupta Completed
Design and Development of Metal Three D printer Mr Pradeep jain Ongoing

Staff Development Programs

Title Date(s) Resource Organization
Staff Development Programme 28 June – 09 July 2021 AKGEC Ghaziabad
Staff Development Programme 29 June – 18 July 2020 AKGEC Ghaziabad

DETAILS OF FACULTY MEMBERS WHO HAVE ENROLLED FOR NPTEL COURSE IN CURRENT ACADEMIC SESSION (2020-21)

S. NO. FACULTY NAME COURSE NAME
1 PROF. DEVENDRA SINGH MATERIAL SCIENCE AND ENGINEERING
2 MR. PRADEEP JAIN RAPID MANUFACTURING
3 MR. VIVEK KR. PANSARI MATERIAL SCIENCE
4 MR. AJAY KANT DUBEY MATERIAL SCIENCE AND ENGINEERING
5 MR. GAJESH KUMAR TOTAL QUALITY MANAGEMENT
6 MR. ASHUTOSH YADAV I.C. ENGINES AND GAS TURBINES
7 MR. NIRMAL GARG MODELLING AND SIMULATION OF DYNAMIC SYSTEMS
8 DR. KAMAL K. MITTAL OPERATIONS MANAGEMENT
9 DR. SUMAN GOTHWAL INTRODUCTION TO ABRASIVE MACHINING AND FINISHING PROCESSES
10 DR. ALOK VARDHAN TOTAL QUALITY MANAGEMENT-1
11 MR. ANSHUL K. PANCHBHAIYA TOTAL QUALITY MANAGEMENT -1
12 MR. SHANTANU SINGH TOTAL QUALITY MANAGEMENT -I
13 DR. TARUN BHARDWAJ RAPID MANUFACTURING

DETAILS OF FACULTY MEMBERS WHO HAVE ENROLLED FOR NPTEL COURSE IN CURRENT ACADEMIC SESSION (2019-20)

S. NO. FACULTY NAME COURSE NAME
1 DR. DEVENDRA SINGH (HOD) ROBOTICS
2 DR. PALLAB BISWAS Entrepreneurship
3 MR. VIVEK KR. PANSARI Engineering Mechanics- Statics and Dynamics
4 MR. AJAY KANT DUBEY Engineering Mechanics- Statics and D
5 MR. H.S.CHAURASIYA Fundamental of welding science and technology
6 MR. JITENDRA YADAV Fundamental of welding science and technology
7 MR. GAJESH KUMAR Operation Research
8 MR. ANKUR TYAGI Inspection and quality control in manufacturing
9 MR. AMIT KUMAR TRIPATHI Fundamentals of Manufacturing processes
10 MR. DILIP KUMAR Steam Power Engineering
11 MR. ASHUTOSH YADAV Steam Power Engineering
12 MR. BHARTENDU M. TRIPATHI Steam Power Engineering
13 MR. NIRMAL GARG Steam Power Engineering
14 MS. AKRITI GUPTA Inspection and quality control in manufacturing
15 DR. KAMAL KR. MITTAL Principle of Industrial Engineering
16 DR. SUMAN GOTHWAL Manfacturing Process Technology I and II
17 DR. NAMRATA GUPTA Fundamental of welding science and technology
18 MS. SUNITA TIWARI Fluid Mechanics
19 DR. ALOK VARDHAN Fluid Mechanics

DETAILS OF FACULTY MEMBERS WHO HAVE ENROLLED FOR NPTEL COURSE IN CURRENT ACADEMIC SESSION (2018-19)

S. NO. FACULTY NAME COURSE NAME
1 MS. SUNITA TIWARI CONDUCTION AND CONVECTION HEAT TRANSFER
2 MS. AKRITI GUPTA MANUFACTURING GUIDELINES FOR PRODUCT DESIGN
3 MR. ANKUR TYAGI MANUFACTURING GUIDELINES FOR PRODUCT DESIGN
4 DR. KAMAL MITTAL MANUFACTURING PROCESS TECHNOLOGY
5 MR. H.S.CHAURASIYA CONDUCTION AND CONVECTION HEAT TRANSFER
6 MR. BHARTENDUMANI TRIPATHI INTRODUCTION TO FLUID MECHANICS
7 DR. AVIRAL MISHRA PRINCIPLES OF OF CASTIGN TECHNOLOGY
8 MR. NEERAJ GUPTA PRODUCT DESIGN AND MANUFACTURING
9 DR. UMESH VISHWAKARMA MANUFACTURING PROCESS TECHNOLOGY
10 MR. MAYANK KUMAR TIWARI MATLAB PROGRAMMING FOR NUMERICAL COMPUTATION
11 MR. NIRMAL GARG CONCEPTS OF THERMODYNAMICS
12 DR SUMAN GOTHWAL MANUFACTURING PROCESS TECHNOLOGY
13 MR. AMIT KUMAR TRIPATHI IC ENGINES AND GAS TURBINES
14 DR. DEVENDRA SINGH (HOD) ENGG. MECHANICS – STATICS AND DYNAMICS
15 MR. DILIP KUMAR STEAM AND GAS POWER SYSTEMS
16 MR. VIVEK KR. PANSARI ENGG. MECHANICS – STATICS AND DYNAMICS
17 MR. RAJAT GOEL STEAM AND GAS POWER SYSTEMS
18 MR. GAJESH KUMAR ENGG. MECHANICS – STATICS AND DYNAMICS
19 MR. ASHUTOSH YADAV STEAM AND GAS POWER SYSTEMS
20 MR. AJAY KANT DUBEY ENGG. MECHANICS – STATICS AND DYNAMICS
21 MR. JITENDRA YADAV CONCEPTS OF THERMODYNAMICS
22 DR. VISHWAS GROVER INTRODUCTION TO MACHINING & MACHINING FLUIDS